Fill-dirt in Tieton, WA

Fill-dirt is soil used to raise ground elevation or fill holes; it often contains a mix of fines, subsoil, and small rock and is not usually screened topsoil. In Tieton, fill-dirt is appropriate for bulk lot grading, raising driveways before a structural base, and backfill where vegetation or final surfacing is not required. It is not a substitute for compacted engineered base or drainage rock under a driveway or building foundation.

Use this quick method: cubic yards = area (sq ft) x depth (ft) / 27, and estimate 1 cubic yard ≈ 1.3 tons for fill-dirt. For 500 sq ft: 1u0022 ≈ 2.0 tons, 3u0022 ≈ 6.0 tons, 6u0022 ≈ 12.0 tons, 12u0022 ≈ 24.0 tons. For 1,000 sq ft, double those amounts (e.g., 6u0022 ≈ 24.0 tons). These are approximate — order 5-10% extra for compaction and settlement.

Delivered fill-dirt pricing in the Tieton area typically runs roughly $10 to $30 per ton, depending on source, moisture, and distance from local quarries or farms. Hello Gravel requires a 3-ton minimum order; many local suppliers and trucks have similar minimums and many haulers prefer 5 to 10 tons for standard dump-truck loads. Request a zip-code based quote on our site for an exact delivered price to Tieton.

Hello Gravel partners with local aggregate yards, quarries, and producers across Yakima County to source fill-dirt; availability varies seasonally and by supplier. We connect you with suppliers who offer delivery by contracted dump trucks and will confirm delivery capability for your Tieton address during checkout. If you need names and delivery options, check your zip code on our site or contact our sales team for supplier details.

For routine yard or driveway fill, compaction testing is rarely mandated, but requirements change if fill supports a structure, a retaining wall, a septic system, or involves large grades. Yakima County and the City of Tieton may require engineered fill plans and compaction testing for building foundations, substantial grading, or when code-triggering thresholds are exceeded. Always check with the Yakima County Building Department or your local inspector before placing more than a few feet of fill or when work relates to permitted structures.

For non-structural lot fill, place fill in 6- to 12-inch lifts and compact each lift to minimize settlement. If fill supports a driveway base, use engineered fill specifications: compact lifts to a commonly accepted minimum of about 90-95% of ASTM standard Proctor density and build a 6-12 inch engineered base (crushed rock) on top of the compacted fill. For critical work near structures, follow a geotechnical engineer's recommendations and local permit conditions.

Fill-dirt holds more fine particles and moisture than crushed rock, so it is more prone to settlement and frost heave in freeze-thaw cycles common in West Washington elevation ranges. Crushed rock or engineered base materials drain better and resist frost-related movement, making them a better choice under driveways, slabs, and load-bearing areas. Use fill-dirt for bulk grading and then cap with a free-draining base where frost or drainage is a concern.

Many local contractors provide bulk pricing discounts on larger orders and can handle hauling, spreading, and compaction as part of their services, especially for jobs that include site work. Discounts and services vary by company; contractors commonly offer lower per-ton rates for orders over 20-50 tons. If you want spreading and compaction, request it at checkout or ask contractors up front and get written scope and pricing.

Hello Gravel uses contracted dump truck fleets (typically tri-axle trucks) that commonly deliver 10 to 16 tons per load, but some suppliers run smaller trucks for tight access. We list a 3-ton minimum order on the site; if your driveway is tight, add access notes at checkout so the dispatcher can confirm truck type and placement. Drivers may offer tailgate spreading at their discretion, but this is not guaranteed.

Major rental houses in the Yakima area rent plate compactors and rammers suitable for compacting fill-dirt; a small plate compactor typically rents for about $70 to $120 per day, while a jumping-jack compactor rents for roughly $80 to $150 per day. For larger jobs, rented rollers or heavy equipment are available from regional rental yards — expect higher daily rates and possible delivery charges to Tieton. Check local rental centers in Yakima or call our sales team for equipment partner recommendations.