Fill-dirt in North Stanwood, WA

Delivered fill-dirt in the West Washington (North Stanwood) area typically runs in a range rather than a fixed price. Expect roughly $25 to $55 per ton delivered, or about $30 to $75 per cubic yard, depending on supplier, distance from source, truck type, and seasonal demand. Hello Gravel lists a 3-ton minimum order and provides clear pricing up front during checkout.

Hello Gravel requires a minimum order of 3 tons, which covers most small residential jobs. Local landscape yards and independent haulers in Snohomish County commonly set delivery minimums of 3 to 5 cubic yards for small deliveries, while tri-axle dump trucks typically carry 10 to 14 cubic yards (about 11 to 18 tons) for full-load pricing.

Request well-graded, clean fill-dirt with minimal organics and no large roots or debris; specify that you need material suitable for compaction and structural support. For slab subbase and driveway approaches in Snohomish County you may prefer engineered fill or a compactible fill with fines controlled; if drainage or frost performance is a concern, discuss using a crushed aggregate subbase under or adjacent to the fill dirt.

Fill-dirt is good for building grade and backfilling but holds water and drains poorly compared with crushed rock. Crusher run (mixed fines and rock) offers better load-bearing and compaction for driveways but still retains some fines; clean drain rock (no fines) is best for drainage, frost mitigation, and preventing frost heave in wet parts of the Puget Sound region. Choose based on function: fill to raise grade, crusher run for structural base, and clean rock where drainage is required.

Residential structural fills in Snohomish County commonly aim for around 90% to 95% of maximum dry density (Standard or Modified Proctor) where a structural fill is required. Equipment typically includes vibratory plate compactors or walk-behind rollers for shallow lifts and ride-on vibratory rollers for larger areas; lifts are commonly compacted in 6 to 8 inch loose thickness increments until the specified density is met. For permit-related or structural work, follow your engineer or the county’s specifications and request compaction testing if required.

Yes, adding large volumes of fill near critical areas often triggers permits in Snohomish County and state agencies. Fill placed in wetlands, shorelines, or within regulated buffer zones usually requires county permitting and may need state or federal approval (for example from Washington Department of Ecology or Army Corps of Engineers). Always check Snohomish County permitting and critical areas maps before ordering large deliveries and consult Hello Gravel’s team if you need help checking permit requirements.

Fill-dirt density varies with moisture and composition, so use a practical range: about 1.1 to 1.4 short tons per cubic yard for most fill-dirt in this region. Example conversions: 5 cubic yards ≈ 5.5 to 7 tons; 10 cubic yards ≈ 11 to 14 tons; 20 cubic yards ≈ 22 to 28 tons. Use Hello Gravel’s material calculator or ask our team for a site-specific estimate if your material is unusually wet or compacted.

Delivered material costs and labor vary by access and job complexity. Delivery from Hello Gravel is often free in many areas but when charged expect $25 to $55 per ton for the material; placement and compaction labor commonly ranges from about $5 to $20 per cubic yard for simple, machine-assisted spreading, or $50 to $150 per hour for operator-plus-equipment rates on small residential jobs. For a reliable total, request an on-site or photo-based quote from Hello Gravel so local hauling, equipment access, and crew time are reflected.

Common examples: to raise a 1,000 sq ft area by 3 inches you need about 9 cubic yards (roughly 10 to 13 tons); to raise the same area by 6 inches you need about 18 cubic yards (roughly 20 to 25 tons). Always account for compaction (add about 10% to 20% extra material) and check local soil conditions—wet, uncompacted fills may settle more than dry granular fills.

Yes. Because Hello Gravel sources materials regionally, the color and texture of fill-dirt in North Stanwood will reflect local geology and can vary between suppliers. If color or texture matters for a visible landscape area, note preferences in Order Notes during checkout and ask for photos or a sample before delivery; for buried or structural work, focus on cleanliness and compaction properties instead of appearance.