Fill-dirt in Mineral, WA

Delivered prices for fill dirt in Mineral and West Washington vary with distance, quantity, and supplier. Expect a rough range of $20 to $60 per cubic yard delivered, and roughly $15 to $40 per ton depending on moisture and compaction. For an exact price for your zip code and minimum order (3 tons), get a quote through our site or contact our team.

To raise 1,000 sq ft by 2 inches you need about 6.2 cubic yards of material (1000 ft2 x 2/12 ft = 166.7 ft3 ÷ 27 = 6.17 yd3). We recommend adding 10-15% extra for compaction and waste, so order about 7 cubic yards. Hello Gravel serves West Washington through local suppliers; enter your zip code to confirm availability and delivery timing.

Fill dirt is a good choice for raising grade, filling low spots, and creating a stable subgrade because it compacts well. It is not a finished surface and does not provide good drainage or long-term wear like gravel or crushed stone, which are better for paths, driveways, and drainage areas. For yards in rainy Mineral, use fill dirt to build the grade and then a layer of crushed stone where drainage and a durable surface are needed.

Fill dirt is typically cheaper per cubic yard than crushed stone because it is plain soil with little processing, but hauling distance can change the math in rural areas around Mineral. Choose fill dirt when you need to raise or level ground and compact the subgrade; choose crushed stone for a driveway base or any area that needs drainage and structural support. For a long-lasting driveway in Mineral's wet climate, use crushed stone as the base and only use fill dirt under deep voids or to adjust grade.

Costs depend on driveway width and depth; a common example is a 20 ft long by 10 ft wide area with a 6-inch crushed-stone base, which needs about 3.7 cubic yards of base material. Expect to pay separately for fill dirt (if you need to raise the subgrade), base material, and compaction labor; materials for a small 20-ft section might range from a few hundred dollars for materials to several hundred more for compaction and labor. For an accurate estimate for your exact dimensions and site conditions in Mineral, request a quote and include notes about compaction and spreading.

A 10-yard load of fill dirt is 10 cubic yards and typically weighs roughly 10 to 14 tons depending on moisture and soil type. Delivered prices in the Mineral area often fall somewhere in the range of $250 to $600 for a 10-yard load, but final cost depends on supplier availability, haul distance, and whether tailgate spreading is requested. Use our checkout or contact our team to get an exact price for your address.

You can put gravel over existing dirt in some cases, but you should remove organic topsoil and soft material first and compact the subgrade to prevent sinking and washout. If you have significant low spots or soft areas near Mineral's wet climate, add and compact fill dirt to create a stable base before placing gravel. Proper compaction is key—uncompacted subgrade will cause gravel to rut and move quickly.

Materials that behave more like a hard surface include polymer-stabilized gravels, crusher fines compacted with a stabilizer, and cement-treated or recycled concrete bases. Availability varies by supplier in the West Washington region and may be limited near small towns like Mineral, so check product availability when you request a quote. If you need a hard, driveable surface, tell us your location and project so we can confirm local supplier options and delivery.

Avoid using pea gravel where you need compaction or traction, and avoid fill dirt where you need drainage—both perform poorly in high-traffic or wet drainage areas. For drainage or a stable base in Mineral, order 3/4u0022 crushed rock, drain rock, or class II road base instead; these materials shed water and compact into a stable layer. Add pea gravel only as a decorative top layer over a prepared base, not as the structural or drainage layer.

Fill dirt is mostly soil used to raise grade and fill voids; it compacts but does not drain well or provide structural strength. Crushed stone is angular rock that locks together, provides drainage, and creates a stable, load-bearing base for driveways. For long-term driveway stability in Mineral's wet climate, order crushed stone for the base and use fill dirt only to correct subgrade elevations before installing the base.