Gravel in Bellevue, WA

Materials and delivery in Bellevue usually range from about $30 to $60 per ton for common driveway gravels, depending on type and season. Hello Gravel has a 3-ton minimum and may offer free delivery in many areas; exact pricing depends on supplier, delivery access, and whether spreading is requested.

If you hire a contractor, expect spreading and basic grading to add roughly $150 to $600 for a single-car driveway, or about $10 to $40 per cubic yard installed depending on site access and slope. Homeowners doing DIY pay only material and delivery; tailgate spreading by drivers may be available at their discretion but is not guaranteed.

For Bellevue's wet climate, use angular, crushed rock (for example 3/4u0022 crushed rock or crush-and-run) as a compactable base and a smaller crushed or washed rock (3/8u0022 to 1/2u0022) for the wearing surface to promote drainage and resist rutting. Avoid rounded pea gravel as a primary driveway surface on slopes because it migrates and holds moisture.

Calculate area in square feet, multiply by depth in feet, then divide by 27 to get cubic yards; one cubic yard of gravel is roughly 1.3 short tons (about 1.2 to 1.6 tons depending on rock type and moisture). Example: a 12' x 20' driveway at 3u0022 depth is about 2.2 cubic yards or roughly 2.9 tons.

Requirements vary: many simple driveway repairs or like-for-like replacements do not require a city permit, but changes that affect drainage, impervious area, curb cuts, or slope may trigger permits or review. Check with City of Bellevue Development Services and your HOA before ordering materials to confirm local codes and any design restrictions.

Expect light maintenance annually and more substantial attention every 2 to 5 years: regrading ruts, topping up material (often 1/4u0022 to 1/2u0022 per year of wear), and clearing drainage channels. Bellevue's rainfall can wash fines and cause moss growth, so regular drainage checks and occasional replenishment keep the surface stable.

Gravel is more permeable than asphalt and can help infiltration if installed with a permeable base, but compacted fines reduce permeability; permeable pavers provide engineered stormwater benefits but cost more. For any project affecting runoff or public drainage, consult City of Bellevue stormwater guidance since some projects may require mitigation or permits.

For slopes, use a well-graded mix: a compactable base of 1u0022 to 3/4u0022 crushed rock with coarser aggregate below and smaller angular topping for traction; install geotextile fabric, edge restraints, and drainage swales to control erosion. In steep areas, consider terracing, retaining edges, or installing permeable retaining solutions to reduce washout.

Yes, recycled crushed concrete and reclaimed aggregate are commonly available in the Seattle-Tacoma region and are often 10% to 30% less expensive than virgin crushed rock. They work well as base material but can contain more fines and may not be as attractive for a final surface; discuss intended use with your supplier before ordering.

Hello Gravel standard delivery is 2+ business days, with next-day delivery available for orders placed before noon CST at an extra fee; delivery uses contracted tri-axle dump trucks and a 3-ton minimum applies. Drivers may perform tailgate spreading at their discretion; ensure clear access, mark utilities, and list delivery notes at checkout for special instructions.

Hello Gravel connects you with local, vetted suppliers and haulers serving Bellevue and the Seattle-Tacoma area so you can order online and schedule delivery. We source regional materials that reflect local geology, and you can add color or placement notes at checkout to help match expectations.

DIY is feasible for smaller, flat projects if you can handle grading, compaction, and material spreading; hiring pros is advisable for slopes, drainage work, or large driveways. Contractor rates in the Bellevue area vary widely; expect bids based on job complexity—get several quotes, and compare per-yard installed pricing, access fees, and any erosion-control measures required by the site.