Fill-dirt in Woodbridge, VA

Delivered fill-dirt prices in Woodbridge commonly fall in a range because of supplier, haul distance, and blend. Expect roughly $12 to $35 per ton (about $16 to $45 per cubic yard) as a ballpark; exact pricing depends on your zip code and truck access. For an accurate delivered price, get a quote through Hello Gravel using your address.

To cover 1,000 sq ft you need about 6.2, 12.3, and 18.5 cubic yards for 2u0022, 4u0022, and 6u0022 respectively. Using a common conversion of 1.2 to 1.4 tons per cubic yard, that equals roughly 7.4–8.7 tons (2u0022), 14.8–17.2 tons (4u0022), and 22.2–25.9 tons (6u0022). Always round up for settling and to allow for compaction.

Fill dirt is useful for grading and raising low spots but is not a good structural driveway base in Woodbridge’s climate and soils. Because local soils can be clayey and experience freeze-thaw cycles, a compacted crushed stone base (typically 6u0022 or more) is recommended for long-term performance. Use fill dirt only to level before installing a proper granular base and surface material.

Costs vary by width and design, but as an example: a 20 ft long by 10 ft wide driveway (~200 sq ft) might cost roughly $350 to $1,200 for materials and delivery plus contractor labor if hired. A 100 ft long by 10 ft wide driveway (~1,000 sq ft) typically runs about $1,800 to $5,500 total for materials, delivery, and contractor labor depending on base depth, hauling distance, and site prep. These are rough ranges; get local quotes for precise estimates and factor in grading, drainage work, and compaction.

Coverage from 1 ton varies with material density, but using a common conversion (1.2–1.4 tons per cubic yard), 1 ton will cover about 40–125 sq ft. That corresponds approximately to 41–50 sq ft at 6u0022, 62–75 sq ft at 4u0022, and 124–150 sq ft at 2u0022 depth. Always allow extra for settlement and uneven grades.

Yes, many local contractors and hauling partners around Woodbridge offer delivery and optional spreading/compaction services. Hello Gravel can arrange delivery; tailgate spreading is sometimes available at the driver’s discretion and contractor spreading/compaction is typically a separate paid service. Spreading and compaction fees commonly run from about $50 to several hundred dollars depending on job size and access, so request a firm quote before booking.

Small, minor yard fills usually do not trigger county permits, but larger grading, changes to drainage, or new driveway curb cuts often require Prince William County permits and may need stormwater or erosion control approvals. Many HOAs in Woodbridge have rules that require approval for visible changes like driveways or large grading projects. Check with Prince William County building and zoning and your HOA before starting work to avoid fines or required rework.

Hello Gravel’s minimum order is typically 3 tons, and many local suppliers follow similar minimums, though some sites may require larger loads for remote deliveries. Standard delivery lead time is 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. During busy seasons allow additional days and contact our team if you need a specific delivery window.

For small leveling projects, homeowners can place fill dirt over existing soil, but proper staging is important: add fill in thin lifts, compact between layers, and avoid burying organic topsoil that supports lawns. If you plan to grow grass or plants, finish with 4–6u0022 of topsoil over the fill and ensure proper grading for drainage away from foundations. For large fills or areas near drainage courses, consider professional grading and compaction and check county regulations.

Two inches of fill dirt is not sufficient as a driveway base; it will compact and rut quickly in Woodbridge conditions. For a durable driveway, install a structural granular base of 6u0022 to 8u0022 of compacted crushed stone, with additional surface stone on top. Use fill dirt only for minor leveling beneath the proper granular base and always compact in layers.