Fill-dirt in Mitchells, VA

Delivered fill dirt to Mitchells, VA usually varies by supplier, load size, and distance. As a rural area with a population of about 180, expect typical delivered prices to range roughly from $30 to $80 per ton (smaller loads toward the high end), with Hello Gravel minimum orders starting at 3 tons and standard delivery taking 2+ business days. Final pricing is shown at checkout or on your quote, so check your zip code or contact our team for an exact delivered price.

Volume depends on depth: for 1,000 sq ft a 2u0022 layer is about 6.2 cubic yards, 3u0022 is about 9.3 cubic yards, and 4u0022 is about 12.3 cubic yards. Fill dirt usually weighs about 1.2 to 1.6 tons per cubic yard, so that equals roughly 7.5–20 tons depending on depth; delivery cost will depend on the tonnage and distance but you can expect rural delivered rates shown earlier (roughly $30–$80/ton). Use our material calculator or request a quote for an exact delivered price to Mitchells (zip 22729) and remember our minimum order is 3 tons.

Material-only, plain fill dirt is generally cheaper per ton than gravel because it is just earth without crushed stone or fines. However, fill dirt is not a durable wearing surface for driveways — you will typically need compacted fill dirt as a base and gravel or crushed stone as the driving surface, which raises total cost. For long-term performance in rural Virginia, plan on a compacted fill base plus a gravel or crushed-stone topcoat rather than using fill dirt alone.

For small repairs you can place gravel directly over existing dirt, but for a stable long-term driveway you should build up grade with clean fill dirt and mechanically compact it before adding gravel. A common practice is 4–6 inches of compacted fill as a base, then 2–4 inches of crushed stone or gravel on top. Hello Gravel drivers can sometimes tailgate spread but spreading and mechanical compaction are contractor services you should arrange locally.

A reliable approach is compacted fill dirt to establish grade, followed by a base layer of 3/4u0022 crushed stone or recycled crushed concrete, and finished with a 1–2u0022 layer of smaller crusher-run or 3/8u0022 gravel for wearing surface. This layered system drains better and resists rutting in the rural Virginia freeze-thaw conditions. Because material availability varies regionally, ask for local supplier recommendations when ordering through Hello Gravel.

As an example, a 20-ft wide, 100-ft long driveway at 4u0022 depth needs about 24.7 cubic yards, roughly 30–40 tons depending on soil density. Using a delivered price range of $30–$80 per ton, material plus delivery would typically fall between about $900 and $3,200, with the lower end for larger loads and closer suppliers and the higher end for small loads or long hauls. For a firm quote for your exact length and depth, use our calculator or request a delivery quote for zip 22729.

Yes — fill dirt is commonly used to raise and level yards where you are not trying to grow topsoil or lawn immediately; for planting or turf you will want topsoil instead. Delivery cost depends on volume and distance; small loads start at our 3-ton minimum and standard delivery is 2+ business days. Tailgate spreading may be available at the driver's discretion, but mechanical spreading and compaction are contractor services and may add labor costs, so get a local spreading/compaction quote if you need finished grade work.

Coverage varies with depth and the soil density used for conversion, but as a rule of thumb 1 ton of fill dirt typically equals about 0.7–0.8 cubic yards. That covers roughly 60–80 square feet at a 3u0022 depth and about 45–60 square feet at a 4u0022 depth. Use these numbers to estimate needs, then double-check with our material calculator or ask our team for a site-specific estimate.

Stabilized products (polymer-treated or cement-stabilized materials) are a different category than loose fill dirt and availability in Mitchells depends on local suppliers. When available, stabilized products are typically more expensive — often 1.5 to 3 times the price of plain fill dirt — because of additives and processing. If you need a stabilized base for heavy use, contact Hello Gravel for help checking supplier availability and getting a delivered quote for your zip code.

For potholes, plain fill dirt is the cheapest material but it will compact and wash out and will not provide a durable driving surface. Small crushed stone or 3/4u0022 crushed aggregate is a better practical choice because it locks together and sheds water, making it more resistant to ruts; for small repairs, this is modestly more expensive but will last much longer. Hello Gravel can deliver the material you choose; follow up with compaction and grading for the best result.