Gravel in Bedford, VA

Prices vary by type, supplier, and distance from local quarries, but expect ballpark ranges rather than a fixed rate. Typical retail ranges in the region are roughly $25-$60 per ton or $30-$80 per cubic yard depending on type and delivery, but local West Virginia or Bedford County suppliers may be lower or higher. For an accurate price, request a quote through Hello Gravel so we can pull local supplier rates and delivery fees for your zip code.

Crushed stone with angular edges (such as #57 or 3/4u0022 crushed stone) and recycled crushed gravel are good choices because they lock together and drain better than round pea gravel. A well-graded base mix (crusher run) under a wearing layer helps resist rutting on clay soils and with freeze-thaw cycles. Add proper subgrade preparation and drainage to get the best performance from any gravel in Bedford's climate.

Hello Gravel coordinates with local suppliers and contracted dump truck haulers that service Bedford and surrounding areas, though trucks are not branded Hello Gravel. While some local contractors and landscaping companies offer delivery plus spreading, tailgate spreading by drivers is available only at their discretion and must be requested at checkout. If you need full spreading and grading, we recommend booking a local contractor for installation after delivery; contact our team for local supplier connections.

Minimums vary by supplier, but Hello Gravel's platform generally requires a 3-ton minimum for delivery. Standard delivery lead time is 2+ business days, and next-day delivery may be available if ordered before the cutoff (fees apply). Delivery fees depend on distance, load size, and access; your checkout quote will show any delivery charge and options.

Measure length, width, and desired depth in inches, then convert to cubic yards by multiplying length x width x depth (in feet) and dividing by 27. For tons, multiply cubic yards by about 1.3 to 1.5 depending on gravel density and moisture (use 1.3 for crushed stone, up to 1.5 for heavier mixes), and add 5-15% extra for compaction and slope. Use Hello Gravel's material calculator or contact our team for a project-specific estimate if you have steep slopes or heavy truck traffic.

Regulations vary by location and HOA; some Bedford County and city neighborhoods have zoning, setback, or design rules that affect driveway materials and drainage. Always check with the Bedford City Planning office or Bedford County zoning and your HOA before starting work to confirm permit and material requirements. Hello Gravel can help identify typical local requirements, but customers should verify regulations before ordering.

Start with a compacted subgrade and a 4-6 inch compacted base of crusher run or dense-graded aggregate, then top with a 1-2 inch wearing layer of #57 or similar stone. Use geotextile fabric over the subgrade to reduce mixing with clay soils, and install sturdy edging such as treated timber, poured concrete curbing, or metal/plastic edging to keep material contained. Also include side ditches or catch basins to direct runoff and prevent erosion on steep sections.

Replenishment depends on traffic, slope, and drainage; for a typical residential driveway expect partial refresh or topping every 3-7 years, with more frequent spot repairs after heavy rains or freeze-thaw seasons. High-use driveways or those used by heavy trucks may need maintenance yearly. Good initial base work and drainage will substantially reduce the frequency of regrading and adding material.

Gravel has the lowest upfront cost but higher routine maintenance (regrading, topping, and periodic compaction). Asphalt is mid-range up front with moderate maintenance every 10-20 years for repairs and sealcoating, while concrete has the highest initial cost but typically lower ongoing maintenance. For Bedford's freeze-thaw cycles and clay soils, proper base preparation is the key cost driver for all three; gravel often remains the most cost-effective for low-traffic rural driveways when maintenance is acceptable.

Yes, many Bedford-area landscapers and driveway contractors offer installation packages that include grading, geotextile, compacted base, stone delivery, and spreading. Labor and installation costs vary widely; expect ballpark contractor rates in the region around $50-$100 per hour or $1.50-$4.00 per square foot for complete installation depending on scope, access, and site prep needs. For an accurate price, request a bundled installation quote through Hello Gravel or contact local contractors for site visits.

Use our material calculator and select the approximate stone type you want, then check availability by zip code to see local supplier pricing and delivery windows. Request tailgate spreading at checkout if you want the driver to consider it, but plan to hire a local installer for guaranteed spreading, compaction, and grading. If you have special color or texture preferences, note them in the Order Notes and contact our team for guidance before placing the order.