Fill Dirt in Moroni, UT

Delivered fill-dirt in the Moroni/West Utah area typically runs in the range of $12 to $25 per ton, depending on source, distance, and truck access. Hello Gravel has a 3-ton minimum and standard delivery takes 2+ business days; remote or difficult-access drops can add hauling fees. Get an exact quote by entering your zip code on our site or contacting our team.

Hello Gravel connects you with local suppliers and contracted dump truck haulers in the West Utah region to deliver bulk fill-dirt to Moroni. Deliveries are usually by tri-axle dump truck, have a 3-ton minimum, and tailgate spreading may be available at the driver’s discretion; always add delivery notes and photos to your order to confirm access and drop location.

A practical rule of thumb for fill-dirt is about 1.1 to 1.4 tons per cubic yard; a common conversion we use is roughly 1 cubic yard = 1.2 tons. Because density varies by moisture and composition, ask for a local conversion on your quote and plan to order 5-10% extra to allow for compaction and settling.

For a 10 ft by 30 ft driveway raised 4 inches you will need about 3.7 cubic yards, roughly 4.5 tons. For leveling a 1,000 sq ft yard by 2 inches you will need about 6.2 cubic yards, roughly 7.5 tons. These are estimates; measure your area, use our material calculator, and add 5-10% for settlement.

Moroni experiences seasonal freeze-thaw that can cause heaving and additional settlement, and local clay-rich soils hold water and amplify swelling. To reduce problems, avoid placing frozen material, improve drainage, use well-graded or granular fill where possible, and compact in thin lifts to limit future movement.

For structural areas in Moroni, avoid organic-rich topsoil and use clean, well-graded fill or a compacted road base product; engineers commonly specify compacted lifts of 6 to 8 inches. Compaction targets are typically 90% to 95% of Standard Proctor for driveway bases and building pads. For foundations or significant loads, get a geotechnical recommendation and follow local building department requirements.

Fill-dirt is good for bulk grading and raising low spots but is not a durable finished driving surface. Road base or crusher fines are better choices for a driveway base or surface because they drain and compact better. Use topsoil only for planting areas; if you need both grade and surface, place compacted base material first and top with crusher fines or pavement.

A driveway made only of fill-dirt will settle, rut, and require frequent maintenance in Moroni's climate and is not recommended as a long-term surface. Expect to regrade, add material, and improve drainage every few seasons, especially after freeze-thaw cycles. For longer life, use compacted road base or crusher fines as the finished surface.

Small landscape fills usually do not need permits, but larger fills, changes to drainage, or any work affecting foundations or setbacks may require a permit or engineered fill. Moroni is a small city (population about 1,846), so check with Moroni City Hall or Sanpete County building department before starting major grading to confirm local rules and any inspection requirements.

Before ordering, send photos of the access route and drop area in the Order Notes and mark the intended drop zone with stakes. Confirm truck size and parking space with our team, plan for extra material (5-10%) for settling, and ask about tailgate spreading if you want the driver to spread at their discretion. Schedule deliveries outside of frozen ground conditions when possible to avoid compaction and spreading issues.

Place fill in 6 to 8 inch lifts and compact each lift to the specified density to minimize future settlement. Improve site drainage, avoid high-clay mixes in load-bearing areas, and consider geotextile fabric where soft subgrades exist. For critical areas, hire a soils engineer to recommend materials and compaction targets.

Contact Hello Gravel customer service promptly with photos and a description of the issue so we can work to resolve it. We will coordinate with the supplier and hauler to find a satisfactory solution; see our refund policy for details on eligible claims.