Fill Dirt in Young County, TX

Prices vary by supplier, truck size, and distance, but delivered fill dirt in the Texas region commonly runs roughly $15 to $45 per ton. A single truckload in Young County can therefore range widely depending on truck capacity and delivery fees. Exact pricing is shown at checkout—enter your zip code or contact our team for a personalized quote.

Buying in bulk is usually the most cost-effective approach: larger orders cut the per-ton delivery cost. Choose plain fill dirt (not screened topsoil), compare cubic yard vs ton quotes, consider pickup if you can haul it, and consolidate deliveries when possible. Hello Gravel’s calculator and sales team can help you size the job and compare options.

Use this shortcut: square feet covered = (cubic yards in the truck * 27) / (depth in feet). For a common tri-axle load of 10 cubic yards, expect about 1,620 sq ft at 2", 810 sq ft at 4", and 540 sq ft at 6". If the truck holds 12 cubic yards, multiply those numbers by 1.2.

Suppliers price fill dirt both ways: some quote by the cubic yard and others by the ton. Which is cheaper depends on moisture content and the supplier’s pricing; for loose, dry soils cubic-yard pricing can be simpler, while wet or heavy soils can make ton pricing more expensive. Compare both types of quotes on Hello Gravel—our checkout shows the supplier’s chosen unit so you can pick the best option.

A typical tri-axle dump truck in this area carries about 10 to 12 cubic yards, which usually equals roughly 10 to 14 tons for fill dirt depending on moisture and soil type. Heavy, clay-rich soils will weigh more per cubic yard; dry, sandy fill will weigh less. Ask your Hello Gravel quote for the exact expected tonnage for your delivery.

Yes, fill dirt is commonly used to level yards, raise low spots, and fill behind walls; Hello Gravel can supply it for those tasks. However, fill dirt is not a recommended finished surface or long-term driveway base because it compacts and can hold moisture. For driveway bases you should consider crushed stone or gravel and proper compaction—talk to our team if you need material recommendations for a structural base.

Bulk pricing and lower per-ton delivery fees are often available for multiple loads, but availability depends on the local supplier and trucking routes. Hello Gravel coordinates with local haulers and can often negotiate better rates for larger orders—contact our sales team with your address and desired quantity to see if a discount applies. Keep in mind rural Young County deliveries can still carry extra fees for distance or difficult access.

Standard delivery is typically 2+ business days from order confirmation; next-day delivery may be available for orders placed before noon CST for an extra fee. Delivery fees depend on distance to the supplier, site access, and load size—some areas get free delivery while more remote Young County locations may incur charges. You can request tailgate spreading at checkout, but drivers perform spreading only at their discretion.

Fill dirt is cheaper than many engineered materials but is not a substitute for gravel or concrete when structural strength, drainage, or a stable driving surface is needed. For non-structural grading and raising ground level it’s fine, but for bases under driveways or slabs you should use compacted crushed stone or proper subbase materials. If budget is a concern, we can suggest cost-effective mixes and strategies that suit Young County soil and climate.

Start at hello-gravel.com and enter your zip code to check availability, select 'fill-dirt', pick the quantity or number of tons, and choose a delivery date on the checkout calendar. Add any site notes (drop location, gate code, request for tailgate spreading) and complete payment online, or call 855-241-8884 to place the order with a sales rep. We’ll confirm the supplier, truck type, and estimated arrival window after you order.

Measure the area (length x width) in feet and decide the depth in inches, then use this formula: cubic yards = (area in sq ft * depth in inches) / 324. Round up to account for compaction and uneven surfaces and convert cubic yards to tons using your Hello Gravel quote or ask our team for an estimated tons-per-cubic-yard value for local fill dirt. Use our online calculator or contact sales for a quick, site-specific estimate.