Fill Dirt in Texarkana, TX

Typical screened fill dirt prices in the Texarkana area usually run about $10 to $25 per cubic yard delivered, which translates roughly to $8 to $18 per ton depending on moisture and compaction. Exact pricing depends on supplier availability, how far the truck travels, and minimum order size (Hello Gravel minimum is 3 tons).

Many local suppliers include delivery in the per-yard price for nearby drop-offs; longer hauls may incur a fuel or distance fee. Typical dump trucks used are tri-axle trucks that can carry roughly 15 to 25 tons; check driveway access, overhead wires, and curb restrictions before scheduling delivery.

Texarkana soils often contain clay that swells when wet and shrinks when dry, which can cause settling or movement in un-compacted fill. For areas with frequent rainfall, use screened or engineered fill and proper grading to promote surface drainage and reduce long-term settlement.

Contractors commonly use plate compactors or vibratory rollers for small to medium areas and sheepsfoot or padfoot rollers for deeper lifts and heavy work. Best practice is to place fill in 4-8 inch lifts and compact each lift; for small yards a hand or plate compactor works, while driveways or structural backfill usually need larger rollers and a professional operator.

For a 1,000 sq ft area, expect about 3.1 cubic yards (≈4.0 tons) per inch of fill. That means roughly 6.2 yd3 (≈8.0 tons) for 2 inches, 12.3 yd3 (≈16.0 tons) for 4 inches, and 18.5 yd3 (≈24.0 tons) for 6 inches. Adjust these numbers for your exact square footage and local material density; Hello Gravel’s calculator can convert your area to yards and tons.

Small fill projects on a private residential lot typically do not require a permit, but rules can vary by city, county, or HOA. If you are altering drainage, filling near a floodplain, changing lot grades significantly, or placing material on the public right-of-way, contact Texarkana city planning or your county office to confirm any permit or inspection requirements.

Screened fill dirt with lower clay content offers better compaction and is a good general-purpose choice; mixing in sand or gravel near the surface improves drainage and reduces surface ponding. For slopes or erosion-prone areas, consider combining fill dirt with a coarse drain layer (gravel or crushed stone) and using vegetation or erosion control fabric on the surface.

Properly placed and compacted fill dirt used as backfill or to raise grades can be stable for many years, but some settling is normal over the first 6 to 24 months. For driveways, fill dirt alone is not a durable surface; a compacted, engineered base topped with crushed stone or asphalt will reduce maintenance and last significantly longer.

Provide a clear, level drop zone with at least 12 to 20 feet of turning room and no low-hanging wires or tree limbs; confirm driveway width and surface strength if the truck must drive on it. If delivery is on a public street or requires staging that blocks traffic, check local rules and let Hello Gravel know so we can coordinate any needed permits or alternate drop plans.

Fill dirt is cost-effective for raising grade and non-structural backfill but is not ideal for planting or driveways where drainage and stability matter. Topsoil is better for lawns and landscaping, crushed limestone or gravel is preferred for driveways, and engineered fill or compacted aggregate is recommended for structural foundation backfill where engineered specifications are required.

Order at least the 3-ton minimum and use the online calculator to estimate yards and tons, then choose a delivery window that avoids heavy rain days. Add delivery notes for preferred drop location, request tailgate spreading at checkout if desired (driver discretion), and contact Hello Gravel's team if you need help matching material type or scheduling next-day delivery.