Fill Dirt in Tarrytown, TX

Delivered fill-dirt in the Tarrytown/Austin area commonly runs about $12 to $25 per ton, which is roughly $16 to $33 per cubic yard using a local conversion factor of about 1.3 tons per cubic yard. Prices vary by supplier, moisture content, and truck access, and Hello Gravel’s minimum order is 3 tons. For an exact quote for your address and delivery date, check your zip code on our site or contact our team.

Hello Gravel’s minimum order is 3 tons, and deliveries are typically made with tri-axle dump trucks that carry roughly 10–14 tons (about 8–12 cubic yards) depending on local load rules. Drivers may perform tailgate spreading at their discretion if requested at checkout, but for precise placement or tight sites you should plan to hire a contractor. We schedule standard delivery in 2+ business days with a next-day option for orders placed before noon CST.

Tarrytown sits on Austin-area clay soils that are often expansive and slow-draining; heavy summer storms can saturate clay-heavy fill, causing temporary puddling, runoff, or extra settlement. To reduce problems, compact fill in lifts, maintain positive drainage away from foundations, and consider a cap layer (crusher run or well-graded gravel) where water-shedding or driving surfaces are needed. For critical projects, get a site-specific recommendation from a geotechnical engineer.

Use: cubic yards = (area in square feet x depth in feet) / 27. Convert to tons by multiplying cubic yards by about 1.3 for local fill-dirt (varies with moisture and clay content). Example: to raise a 1,000 ft2 area by 6 inches (0.5 ft) you need 1,000 x 0.5 / 27 = 18.5 cu yd, which is roughly 24 tons.

You may need permits if the work changes existing drainage, involves substantial grading, affects floodplain areas, or exceeds local soil import thresholds; Tarrytown falls under City of Austin rules and possibly Travis County or neighborhood HOA covenants. Before placing large volumes, check City of Austin Development Services and your HOA, and consider contacting our team for local supplier guidance. For structural fills or grading that affects neighboring properties, a licensed engineer or permit is often required.

For bulk raising or backfill, fill-dirt is cost-effective but may be clay-rich and should be well compacted. For driveways, crusher run or crushed stone is better because it compacts well, sheds water, and provides a stable driving surface; topsoil is best reserved for planting and lawn areas. A common approach is compacted fill-dirt for bulk elevation, capped with crusher run for drives and a thin layer of topsoil where you plan to landscape.

Compact fill-dirt in lifts of about 4 to 8 inches before adding the next layer, using a plate compactor for small areas or a vibratory roller for larger areas to achieve uniform density. Keep material at near-optimum moisture—too dry or too wet reduces compaction effectiveness. For structural or foundation work, follow a geotechnical engineer’s specs and consider compaction testing (proctor/field density tests).

If each lift is properly compacted and meets density requirements, light structures or paving can often proceed in days to weeks, but settlement can continue for months depending on soil type and depth of fill. For any load-bearing structure or buildings, obtain a geotechnical report and sign-off—local expansive clays in the Austin area can require engineered solutions and longer monitoring. When in doubt, plan for testing and professional sign-off rather than a fixed waiting period.

Rates vary with access, site complexity, and equipment; expect machine-and-crew rates roughly $75 to $150 per hour for a skid steer or excavator with operator, or a spread-and-compact rate of about $2 to $6 per cubic yard for straightforward yard work. Tight access, hauling inside the yard, or additional grading/finish work will increase costs. Ask local contractors for written estimates and include compaction testing if the project is structural.

Wet, heavy-clay fill-dirt can weigh significantly more than dry material; a practical local rule of thumb is about 1.2 to 1.5 tons per cubic yard for fill-dirt in the Tarrytown area. If you order by tons, moisture affects the volume you receive; if you order by cubic yards you control volume but the delivered tonnage will vary. Tell your Hello Gravel rep whether you prefer ordering by cubic yards or tons and add a contingency of 5–20% for compaction and settlement.

Drivers may offer tailgate spreading at their discretion and if requested at checkout, but Hello Gravel does not guarantee spreading services and drivers assess safety and site conditions on arrival. For precise placement, correct grading, and proper compaction, hire a local contractor who can spread, grade, and compact material to spec. We recommend noting placement instructions in your order notes and confirming any on-site limits with your supplier in advance.

Use temporary erosion controls like silt fence, straw wattles, mulch, or temporary seeding to prevent washouts during heavy summer rains, and shape finished grades to shed water away from foundations and neighboring properties. Keep stockpiles covered if storms are expected and avoid placing fill where it will concentrate runoff into downstream yards or storm drains. If your project is large, your permit or engineer may require a stormwater erosion control plan.