Fill Dirt in Sinton, TX

Delivered fill dirt in Sinton typically ranges from about $10 to $25 per ton, depending on supplier, distance, and whether the dirt is screened or clean (no organics). Larger orders and short local hauls push per-ton cost to the low end; small orders, special handling, or long hauls increase it. Use our checkout to get a live quote for your zip code.

Hello Gravel requires a 3-ton minimum order; many local suppliers charge no extra delivery fee for standard orders but small loads often incur a delivery or fuel surcharge (commonly $50 to $150). Standard delivery is 2+ business days, and next-day delivery is available for orders placed before noon CST for an extra fee. Request tailgate spreading at checkout, noting the driver will decide if it can be done safely.

Local sources usually include landscape supply yards, masonry or landscaping contractors around Sinton and nearby Corpus Christi/Portland areas, and municipal or county stockpiles. Hello Gravel matches your order with screened local suppliers and haulers—enter your zip code to see available vendors and verified pricing. If you need municipal or recycled fill, ask our team and we can check local availability.

For general backfill and grading, standard screened fill dirt (low organics, few rocks) is fine. Under a concrete slab, use compactable, low-organic fill (often called structural or engineered fill) and follow compaction specs; many builders prefer a layer of compacted road base or crushed stone directly under the slab for drainage and support. Tell your contractor the project type so we can match the right local material.

Fill dirt can raise grade under a driveway but is not a good final wearing surface because it compacts stiffly and holds water, which causes rutting and erosion. For driveways, a compacted road base or crushed limestone topped with 3/4u0022 stone or decomposed granite performs much better. Use fill dirt as subgrade only, and place a proper base and surface for durability.

Calculate volume: 1,000 sq ft × (4/12) ft = 333.3 cubic feet, which is 12.3 cubic yards (divide by 27). Fill dirt typically weighs about 1.2 to 1.5 tons per cubic yard, so that area needs roughly 15 to 19 tons; order an extra 5-10% to account for compaction and settlement. Use Hello Gravel’s material calculator for a quick site-specific estimate.

Fill dirt can work in Sinton if it is properly compacted and graded, but West Texas soils can include clay or caliche that expand/contract and shed water differently. For areas with heavy rain or runoff risk, add proper grading, drainage swales, and a crushed-stone layer where surface drainage or load-bearing is needed. Ask suppliers about local soil composition so you can choose a fill with appropriate drainage and compaction properties.

Properly placed and compacted fill dirt under lawns or slabs can last decades with little attention, but exposed fill used as a driving surface will show ruts and erosion within a season or two without a proper base and surfacing. Regular grading, adding gravel surfacing, and maintaining drainage will extend life. For driveways and heavy-use areas, inspect after storms and top with stone as needed.

Small residential deliveries usually do not require a permit, but large fills, changes to grade, or importing material near floodplains or protected areas can trigger city or county permits—check with Sinton city hall or San Patricio County. Truck weight limits and local road rules apply; haulers may need route permits for overweight loads or for deliveries that use restricted roads, so let us know if access is tight or involves local permits. If in doubt, contact our team and we can suggest next steps.

Fill dirt is primarily for raising grade and backfill; it compacts but generally drains poorly and is not a reliable wearing surface. Crushed limestone or road base provides a stable, well-draining base for driveways and slabs and is usually the preferred material where load-bearing and drainage matter. Sand drains well but is less stable under heavy loads—combine materials (e.g., compacted road base topped with stone) for best results in Sinton’s conditions.

Local equipment rates vary, but expect small machine rentals (skid steer) around $80 to $150 per hour and plate compactor or roller rentals $70 to $150 per day; contractor labor commonly runs $50 to $100 per hour depending on experience and job size. Some contractors charge per-ton spreading and compaction fees (often $2 to $8 per ton) for moderate jobs—get local quotes and ask whether spreading and compaction are included. Request tailgate spreading at checkout but note drivers decide if it is safe to perform.