Fill Dirt in San Felipe, TX

Fill dirt material in West Texas commonly falls in a wide range depending on source and quality; a typical material price is often between $8 and $30 per ton. Delivery may be free in many areas through Hello Gravel or charged based on distance and load size; our minimum order is 3 tons. Contact our team for a personalized quote for San Felipe zip codes.

Hello Gravel connects you to trusted regional suppliers and haulers that serve San Felipe and greater West Texas; exact supplier names vary by delivery location. The fastest way to see local options is to enter your zip code on our site or contact our sales team so we can match you with nearby quarries and show available material photos and delivery windows.

For stable compaction in dry West Texas, use well-graded fill dirt with some sand or gravel mixed in (a clay-sand-grit blend) to reduce shrink-swell and improve drainage. For applications where drainage matters, add a 2-4 inch layer of crushed stone or a sand layer beneath the fill to create a capillary break and help shed water.

Calculate area in square feet times desired depth in feet to get cubic feet, divide by 27 to get cubic yards, then multiply by roughly 1.2 tons per cubic yard as a rule of thumb for fill dirt. Example: a 1,000 sq ft area raised 6 inches is 1,000 x 0.5 = 500 cu ft = 18.5 cu yd, which is about 22 tons using 1.2 tons/yd3. For precise needs, use our online calculator or request a quote with your dimensions.

Small residential deliveries typically do not require a permit, but larger commercial fills or work in regulated areas may need permits from San Felipe or Austin County. Some local roads have weight or time-of-day restrictions, and state overweight/oversize rules apply for special truck loads; check with local authorities and let us know large or unusual deliveries so we can coordinate with the hauler.

Fill dirt is an inexpensive soil used to build grade and fill voids but offers poor drainage and less long-term strength than crushed rock. Crushed rock or aggregate base provides better load-bearing capacity, drainage, and long-term stability for driveways and structural backfill; we usually recommend crushed stone or a mix of fill dirt capped with crushed rock for driveways in San Felipe.

Some settlement is normal, especially if fill is not placed and compacted in lifts; most settlement typically happens in the first 6 to 24 months after placement as loose material consolidates with seasonal moisture changes. Proper placement in 4- to 6-inch lifts with compaction greatly reduces long-term settlement, but expect up to a few inches in poorly compacted areas.

For erosion control on slopes, a well-graded unscreened fill that contains a mix of fines and coarser particles can interlock and resist washout better than very fine screened material. Screened fill is useful for final grading and planting but may wash without vegetation or erosion controls; combine grading, erosion blankets, terraces, or seed/planting to stabilize slopes in San Felipe's dry climate.

Hello Gravel's minimum order is 3 tons, which fits small residential jobs, while many contractors order 10 tons or more to get per-ton pricing and cover larger site needs. Contractor pricing varies by material quantity, distance, and site access; request a contractor quote through our site or call to get a detailed price for your San Felipe address.

Place fill in 4- to 6-inch lifts and compact each lift with a plate compactor or sheepsfoot roller until firm; conditioning the moisture content before compaction helps achieve better density, especially in clay soils. Where possible, mix in some sand or gravel to reduce plasticity, and consider geotextile or drainage layers if poor drainage or high shrink-swell is a concern in San Felipe soils.