Gravel in Red River County, TX

A typical tri-axle dump truck in Red River County carries about 10 to 12 tons of gravel (roughly 8 to 12 cubic yards, depending on rock type). Expect material costs around $20 to $40 per ton locally, so a full truckload often runs about $200 to $480 for the gravel itself; delivery may be included in many areas but check your zip code. Prices vary by material type (river rock, crushed stone, pea gravel) and seasonal demand, so get a quote through Hello Gravel for an exact price.

In Red River County, per-ton prices for common gravel types generally range from about $20 to $40 per ton, with specialty or colored gravels costing more. Local geology and supplier stock influence price, so the exact rate depends on the gravel type you choose and current availability. Use Hello Gravel’s checkout or contact our team for an up-to-date per-ton price for your specific zip code.

A 10 cubic yard load of gravel in Red River County contains roughly 12 to 13 tons (use 1.3 tons per cubic yard as a rule of thumb). With local prices of $20 to $40 per ton, a 10-yard load usually costs about $260 to $520 for material only; delivery fees may apply or be free depending on your area. For an exact quote including delivery and any fees, check your zip code on Hello Gravel or request a quote.

One ton of common gravel in the Red River County area typically costs between $20 and $40, depending on type and supplier. This price covers the material only; delivery and handling fees may be additional or waived in some areas. Contact Hello Gravel to confirm current per-ton pricing for the exact gravel you want.

Twenty tons of gravel is about 15.4 cubic yards (using 1.3 tons per cubic yard). At a 3-inch depth over a 12-foot-wide driveway, 20 tons will cover roughly 1,660 square feet, which is about 138 feet in length for a 12-foot-wide drive. Adjust estimates for different widths or depths and contact Hello Gravel for a calculator-based recommendation for your specific driveway.

Costs depend on driveway width, depth, and gravel type, but a rough example: a 20-foot-long driveway that is 10 feet wide at 3-inch depth needs only about 1.9 cubic yards (about 2.5 tons), which material-only would cost roughly $50 to $100. Longer drives and deeper bases raise the cost—typical residential driveway jobs commonly require multiple tons. For a tailored estimate including delivery, use Hello Gravel’s material calculator or get a quote for your zip code.

Measure the length, width, and desired depth of your area, convert to cubic yards (length x width x depth in feet divided by 27), then multiply cubic yards by about 1.2 to 1.4 to get tons (use 1.3 tons/yd3 as a practical rule of thumb). Remember to round up for compaction and waste—order at least 5% to 10% extra for DIY projects. If you prefer, use Hello Gravel’s material calculator or contact our team for help with your Red River County address.

Drivers in Red River County may be able to perform tailgate spreading at their discretion when it's safe and practical, but Hello Gravel does not guarantee spreading services. Request spreading in Order Notes at checkout and the driver will assess the site on arrival. For professional spreading or fine grading, consider hiring a local contractor or discuss options with your supplier.

Red River County’s northeastern Texas climate and soil—often clay-based—can affect drainage and compaction, so coarser crushed stone or a compactable base may work better for driveways and paths. Regional suppliers stock materials that reflect local geology, so color and texture can vary from photos. If drainage or freeze-thaw cycles are a concern, talk to Hello Gravel’s team for material recommendations suited to Red River County conditions.