Gravel in Quemado, TX

Costs vary by material type, quantity, and how far the truck must travel from the supplier. Material prices in West Texas commonly run about $25 to $60 per ton depending on type (base, crushed stone, decorative), and Hello Gravel has a 3-ton minimum order. Many areas get free delivery through Hello Gravel, but rural drops or next-day requests can add a delivery fee; request a quote for an exact price and available delivery windows.

For Quemado's hot, dry summers and occasional heavy rains, a compactable base such as crushed limestone or caliche (3/4u0022 minus) with a surface layer of 3/4u0022 crushed stone or crushed granite performs well. These angular materials lock together, resist rutting, and allow good drainage. Decomposed granite or decorative pea gravel can work for low-traffic or aesthetic areas but are less durable for primary driveways.

A 12x20 ft area at 3 inches deep is about 2.22 cubic yards, which is roughly 3.1 tons using a typical conversion of 1.4 tons per cubic yard. If you want 2u0022 depth use about 2.1 tons; for 4u0022 depth use about 4.2 tons. Note Hello Gravel's minimum order is 3 tons and you should allow a little extra for compaction and grading.

Yes—properly built gravel driveways handle heat well and drain rapidly during heavy rains, reducing puddling. The key is a well-compacted base, a crowned or sloped surface, and good roadside drainage (swales or berms) to channel runoff; without these, flash floods can cause washouts. Consider geotextile fabric and a thicker base in soft areas to reduce movement after storms.

Gravel usually has a lower upfront material and installation cost than asphalt or concrete but requires more ongoing maintenance like periodic grading, weed control, and replenishment. Asphalt or concrete lasts longer and needs less frequent attention but costs substantially more to install. For remote, low-traffic Quemado properties, gravel is often the most practical and cost-effective choice if you accept routine upkeep.

Hello Gravel connects you with local West Texas suppliers and hauling fleets that deliver by dump truck to Quemado and surrounding rural addresses. Minimum orders are typically 3 tons; rural deliveries may have additional distance charges. Enter your zip code on our site or call/text our team to get local supplier options, delivery availability, and exact pricing.

Material-only cost per linear foot depends on width, depth, and material price; a rough range for a single-lane (12 ft) driveway with a 3u0022 surface is about $4.50 to $9 per linear foot in material costs (based on $25–$60/ton). Adding a compacted base layer (6u0022 total) or contractor labor will raise the price—installed gravel driveways often run from about $8 to $25+ per linear foot depending on prep, drainage work, and site access. Get a quote with your driveway dimensions for an accurate number.

For parking areas and heavier traffic, use a 6u0022 to 8u0022 compacted base of 3/4u0022 minus road base or crushed limestone and top with 2u0022 to 3u0022 of 3/4u0022 angular stone. Geotextile fabric under the base helps prevent mixing with native soils and reduces rutting on weaker ground. Maintain drainage, a slight crown, and periodic regrading to keep surfaces stable through hot dry seasons and storm events.

Yes—crushed limestone is commonly used in West Texas and provides excellent compaction and load-bearing properties for driveways. Recycled materials (crushed concrete or asphalt) are often available in some areas and can be suitable as a base layer; they may contain more fines and vary in color. Availability is regional, so check Hello Gravel listings for local options and specify your intended use so we can recommend the best material.

Most Quemado homeowners top up driveway gravel every 1 to 3 years depending on traffic, storms, and initial depth; busier or soft-soil sites may need replenishment more often. Routine maintenance includes grading after wet seasons, adding 1/2u0022 to 1u0022 of new gravel as needed, weed control, and clearing drainage channels. Typical service costs vary: small grading jobs may run $50 to $200, while material costs depend on tons delivered—request a local quote to estimate your ongoing expenses.