Fill-dirt in Providence Village, TX

Delivered fill-dirt prices in the Providence Village area vary by supplier, distance, and material quality. As a rule of thumb expect a delivered range roughly between $15 and $45 per cubic yard (or about $20 to $60 per ton) depending on haul distance and moisture content; final price will be shown at checkout when you enter your zip code. Hello Gravel’s minimum order is 3 tons and delivery options include standard (2+ business days) and next-day (additional fee if ordered before noon CST).

For driveway subgrades use clean, compactable fill-dirt with a mix of fines and sand rather than large clods or organic-rich topsoil. In Denton County’s clay-prone soils, a well-graded fill with good drainage characteristics is preferred; however for the driving surface you should use a compactable base like crusher run or road base on top of the fill. If the fill is supporting a structure or retaining wall, consult a geotechnical engineer for engineered fill specifications.

To calculate, first convert area and depth to cubic yards: 1,000 sq ft at 4u0022 equals about 12.35 cubic yards; at 6u0022 it is about 18.52 cubic yards. Fill-dirt weights vary with moisture and composition, but using a common estimate of 1.2 to 1.5 tons per cubic yard means roughly 15 to 19 tons for 4u0022 and 22 to 28 tons for 6u0022. Always round up and factor in compaction and settling; order a little extra or use Hello Gravel’s material calculator for a precise quote.

Fill-dirt can be used in Providence Village to raise grades and fill low spots, but Texas clay soils expand and shrink with moisture so proper compaction and drainage are essential. Avoid using loose, uncompacted fill as a structural subgrade; install positive drainage away from foundations and consider geotextile fabric where poor soils exist. For landscaping, top with a suitable finished material (topsoil, crushed stone) and avoid placing fill-dirt directly against home foundations without professional advice.

Fill-dirt is intended for grading and raising ground level, not as a durable driving surface; it will rut and hold water under traffic. Crusher run and road base are crushed stone mixes with fines designed to compact into a stable, load-bearing base and are the better choice for driveway subbases and surfaces. For Providence Village driveways we typically recommend compacted road base/crusher run for 4-6u0022 undercoating, with a finished surface of crushed stone or pavement on top of that.

Hello Gravel connects you with trusted local suppliers who source fill-dirt regionally; availability varies by zip code so check your address on our site. Our platform minimum order is 3 tons, but many suppliers and dump trucks operate in larger increments (single tri-axle deliveries commonly carry about 10–12 cubic yards). For larger jobs suppliers may set higher minimums or offer bulk pricing—enter your zip code or contact our team to see local supplier minimums and truck size options.

Prep the site by clearing organic material, soft spots, and debris, then place fill-dirt in 4-6u0022 lifts, compacting each lift to near-optimum moisture with a plate compactor or roller. Check final grade frequently and maintain positive drainage away from structures. For loaded or structural areas have a geotechnical engineer or local building inspector specify compaction targets; drivers may offer tailgate spreading but compaction is the customer’s responsibility unless arranged otherwise.

Fill-dirt used as a subgrade or lot-leveling material is durable when properly compacted and drained, but as a driving surface it will deteriorate quicker in Texas weather and traffic. Expect to do periodic grading and add material or crushed stone every 1–3 years for drive lanes that aren’t paved; well-built stone or paved surfaces on top of compacted base have much longer service life. Regularly maintain drainage, recompact low spots, and top-dress with stone to reduce rutting.

Many Providence Village properties are subject to HOA rules and local permitting for grading and lot changes, so check your HOA guidelines and the town or county building department before ordering. Simple landscaping loads often don’t require a permit, but significant grading, changing drainage patterns, or large deliveries might. When in doubt contact your HOA and local permitting office and mention the scope of the project; Hello Gravel’s team can also advise on common local practices.

Clean fill-dirt is generally cheaper per cubic yard than recycled aggregates like crushed concrete, because recycled materials provide better structural properties and require processing. If you need a structural, compactable base for driveways or pads in Providence Village, recycled aggregates or road base are often a better upfront investment despite a moderate price premium. For simple grade filling or landscaping where load-bearing capacity is not required, clean fill-dirt is usually the most economical option.