Fill Dirt in Progreso, TX

Prices for delivered fill dirt in Progreso vary by supplier, haul distance, and season. Expect a broad range depending on local availability, but the fastest way to get an accurate delivered price is to enter your zip code on Hello Gravel or request a quote; our minimum order is 3 tons.

Yes — Hello Gravel works with a network of local suppliers and haulers that service the West Texas/Progreso area, but availability can change by season and site access. Enter your zip code or contact our team to see current local suppliers and estimated delivery windows.

For structural pads, request clean, non-organic engineered fill or well-graded granular fill with minimal fines and a maximum particle size around 3/4u0022 to 1u0022; avoid material with roots or high organic content. If you need simple volumetric fill (not structural), coarser native fill is common, but always confirm with your engineer or local building department for pad projects.

Progreso and surrounding areas commonly have clayey native soils that can expand and hold water, which affects settlement and drainage. Address these issues by using clean fill below slabs, controlling site grading for positive drainage, and consulting a soils engineer when building near existing clay layers.

Hello Gravel typically delivers by tri-axle dump truck and requires a minimum order of 3 tons; most tri-axles carry roughly 10-14 cubic yards loose, but exact truck size depends on the supplier. Narrow driveways, low overhead lines, soft yard areas, culverts, or gated entrances can restrict access — include site photos and notes at checkout so the hauler can plan the safest delivery.

Local building departments and engineers commonly ask for engineered fill compacted in lifts to 90-95% relative compaction (relative to a proctor test) or to the level specified by your soils report. Compaction is usually verified with a nuclear gauge or lab tests; check your permit requirements and coordinate testing with your contractor or geotechnical engineer.

Fill dirt is intended primarily for raising grade or filling voids and is not a good wearing surface for driveways because it compacts poorly and can rut in wet weather. For durable driveways in the Progreso area, use crusher-run or road base topped with gravel or paving; use fill dirt only as subgrade material if engineered and compacted properly.

Often site grading and structural fill used under buildings require permits and an approved soils report from Hidalgo County or the City of Progreso before final inspections. Permit requirements vary by project scope, so contact the local building department or your engineer early and retain documentation showing imported material meets permit specifications.

Yes — adding fill changes drainage patterns and can increase erosion risk on low-lying lots, especially during summer thunderstorms. Stabilize slopes, establish positive drainage, consider coarser fill near flow paths, and check local floodplain regulations before placing large volumes of fill.

Avoid placing and compacting fill dirt during or immediately after heavy rain periods; Progreso can see intense summer storms that make compaction difficult. The best results are achieved when the soil is near optimal moisture — schedule deliveries during drier weather and work in lifts with compaction testing to ensure consistent results.

Measure the area and calculate the cubic yards or tons needed using our material calculator, confirm truck access and any site restrictions, and note any permit or testing requirements from your local building department. If you have photos or specific delivery instructions, add them at checkout or call our team for guidance so we can match you with the right local supplier and truck.