Gravel in Pottsboro, TX

Delivery fees vary by supplier and distance from the quarry. Hello Gravel typically offers free delivery in many areas, but local haulers serving Pottsboro often charge between $0 and $75 for nearby drops and $75+ for longer hauls; our minimum order is 3 tons. Use our checkout to see exact delivery pricing for your ZIP code and to request next-day delivery before noon CST if available.

For driveways and rural roads in the Pottsboro area, crusher-run or crush-and-run (a mix of fines and crushed rock) is the best all-around base because it compacts well and resists washout. A 3/4u0022 crushed limestone or crushed rock top layer gives good traction and durability; pea gravel is decorative but tends to migrate and is not ideal for primary driveway surfacing. Regional suppliers may use local stone, so colors and texture can vary.

A common 2-car driveway (about 16 ft by 40 ft = 640 sq ft) needs roughly 8 cubic yards for a 4u0022 layer, which is about 12 tons of crushed limestone (using ~1.5 tons per cubic yard). If you need a 6u0022 depth for a stronger base, plan on roughly 18 tons. Always order 10-20% extra to allow for compaction, grading, and waste, and remember our 3-ton minimum order.

Yes, gravel can perform well in Pottsboro if installed with proper base preparation and drainage. Hot, dry summers have little effect on stone, but heavy rains can cause washouts on slopes or poor-draining areas, so installing proper drainage, edging, and a compacted base is important. If your property is near Lake Texoma or on clay soils, consider a thicker base and geotextile fabric to reduce movement.

Per-ton prices in the Pottsboro area commonly range: crushed limestone or crusher run $20 to $45 per ton, pea gravel $30 to $60 per ton, and washed sand $20 to $40 per ton. Prices vary by material, local quarry supply, and seasonal demand, and they may change based on haul distance and delivery fees. Check our site with your ZIP code for exact, up-to-date pricing.

Gravel allows more surface infiltration than asphalt or concrete, so it generally manages light stormwater better and reduces sheet flow if installed with proper slope and drainage features. However, asphalt and concrete require less routine maintenance and are better for heavy traffic or long-term low-maintenance surfaces. Near Lake Texoma, gravel is a good choice for drainage and a lower-cost option, but consider erosion controls and occasional regrading after heavy storms.

Installation costs depend on scope: a basic gravel driveway for a standard 2-car driveway typically runs about $1,500 to $4,000 including grading, base material, and compaction, while larger or more complex jobs can cost more. Contractors may charge a per-ton installation/placement fee of roughly $10 to $25 on top of material costs. Get multiple local quotes and ask for details on compaction, base depth, drainage work, and any additional site prep.

Plan to inspect and regrade your gravel driveway after heavy rains and at least once a year to fill ruts and low spots, adding 1 to 2 inches of new material every 2 to 4 years depending on traffic. Keep a box blade or landscape rake handy for small repairs, and use crushed rock for patching. For erosion-prone areas, install drainage swales, driveways culverts, edging, and consider geotextile fabric to stabilize the stone.

Hello Gravel partners with trusted local suppliers and hauling fleets that service Pottsboro and surrounding West Texas zip codes; you can see available local suppliers and delivery options by entering your ZIP at checkout. Many suppliers offer tailgate spreading at the driver's discretion, but spreading is not guaranteed, so request it in Order Notes and be prepared to hire a local contractor if you need guaranteed spreading. For professional installation, ask us for supplier recommendations or call our team at 855-241-8884.

Permitting depends on the location and scope of the project: small private driveways on existing residential lots usually do not require city permits, but work that alters a public right-of-way, adds a driveway onto a state or county road, or changes drainage may require permits or a culvert installation. Before starting large installs, check Pottsboro city code and Grayson County public works, and contact the local permitting office if your driveway connects to a public road or impacts stormwater flow.