Fill Dirt in Pecan Acres, TX

Fill-dirt is clean earth used to raise grade, fill low spots, or build up a yard before landscaping or building a base. In Pecan Acres it is commonly used to regrade yards, raise driveways above flood-prone areas, and fill trenches before installing a proper base and surface material. It is not designed to be a finished driving surface by itself; use it to get correct elevations, then cap with road base or crushed stone for driveways.

Prices vary by source, moisture, and delivery distance, but delivered fill-dirt in the Texas Region typically falls in a broad range of roughly $15 to $35 per ton (about $11 to $25 per cubic yard) as of mid-2024. Exact cost depends on the supplier, amount ordered, and whether spreading or compacting is requested. Use Hello Gravel to get an exact, instant quote for your Pecan Acres zip code.

Fill-dirt densities vary with moisture and compaction, but a practical conversion is about 1.2 to 1.6 tons per cubic yard for loose fill-dirt. To estimate materials: calculate cubic yards (area in sq ft x depth in ft ÷ 27) then multiply by 1.2–1.6 to get tons. For example, a 1,000 sq ft area at 4 inches deep is about 12.3 cubic yards, or roughly 15–20 tons of fill-dirt.

Hello Gravel works with a network of local sand, gravel and landscape suppliers across the Texas Region and will show nearby sources when you enter your zip code. Common local sources around Pecan Acres include regional sand and gravel pits, landscape yards, and construction recycling facilities in the greater Fort Worth/Weatherford area. For exact supplier names, availability, and photos, request a quote on Hello Gravel and we will show the options for your address.

For building grade over expansive North Texas clay, use well-graded fill that compacts easily and sheds water; a clean, granular select fill or fill blended with coarse sand/gravel is preferable to pure clay-rich topsoil. For driveways you should place several inches of compacted fill-dirt to set grade, then finish with a compactible base material such as road base or 3/4" crushed stone to prevent rutting. Consider geotextile fabric and attention to drainage to reduce the effects of swelling and shrinkage in clay soils.

Fill-dirt itself is durable for raising grades, but performance depends on compaction and drainage. In hot, wet North Texas summers or freeze-thaw cycles, poorly drained or loosely placed fill can settle, erode, or hold water; proper compaction, slope, and surface protection (gravel or pavement) reduce those risks. Plan drainage away from foundations and avoid relying on loose fill-dirt as the final driving surface.

Costs vary, but expect separate line items: material (per ton), delivery, and labor/equipment to spread and compact. For a small residential driveway job, spreading and compacting by a contractor or equipment operator commonly adds several hundred to a couple thousand dollars depending on size and access; many homeowners see total installed ranges of roughly $800 to $3,000 for modest jobs, though larger or difficult-access sites cost more. Get on-site quotes because access, required compaction passes, drainage work, and whether you want a base or finished surface greatly change final pricing.

Rules vary by subdivision and county; many Pecan Acres lots fall under neighborhood HOA covenants that specify driveway materials, finished appearance, and grading. County or city permitting can be required if your work affects drainage, public right-of-way, or involves large earthmoving; check with your HOA and the local building or public works department before placing significant volumes of fill. If in doubt, contact Hello Gravel or local authorities for guidance before scheduling delivery.

Fill-dirt is intended for raising grade and filling voids and usually contains more fines; it compacts well for grade but is not a durable wearing surface. Road base and crusher run are engineered, well-graded crushed-stone mixes designed to compact into a strong structural layer for driveways and roads, so they are a better choice as the driving surface. Limestone screenings are a finer top layer that can bind and provide a smoother finish; the common approach in Texas is to use fill-dirt to set elevations, then install compacted road base and a crushed-stone or screenings surface for durability.

If you use fill-dirt only to set grade and then install a properly compacted base and surface, a well-built gravel driveway can last 10 to 20+ years with routine maintenance. Maintenance tasks include periodic regrading, adding material to low spots after heavy rains, fixing drainage, and occasional re-compaction; simple gravel surfaces may need attention every 1–3 years. If you leave fill-dirt as the top layer or skip proper base preparation, expect more rapid settling and frequent repairs.

Hello Gravel requires a minimum order of 3 tons and typically delivers via tri-axle dump trucks; truck size and local access determine where material can be placed. Drivers will assess site access on arrival and may not be able to dump in tight driveways, across narrow easements, or under low-hanging wires; request tailgate spreading at checkout but note it is performed at the driver’s discretion. Standard delivery lead time is 2+ business days, with next-day delivery available for orders placed before noon CST for an additional fee, and seasonal weather can cause delays.