Fill-dirt in North Roby, TX

Delivered fill-dirt prices in rural West Texas like North Roby commonly range from about $8 to $25 per ton (roughly $10 to $30 per cubic yard, depending on moisture and density). Final price depends heavily on haul distance, road conditions, and whether the order hits a full truckload; Hello Gravel lists a 3-ton minimum and will show exact delivery pricing at checkout.

Material for North Roby orders is regionally sourced from local suppliers and pits in West Texas; Hello Gravel connects you with nearby quarries and farms that supply fill-dirt. In very rural areas suppliers may haul from neighboring counties, so expect some variation in texture and color based on local geology.

Most deliveries to North Roby are made by tri-axle dump trucks that commonly carry roughly 10 to 16 tons of fill-dirt depending on material density and local weight limits. Hello Gravel has a 3-ton minimum; standard delivery is usually offered in 2+ business days with possible additional charges for remote lifts, tight access, or next-day requests placed before noon CST.

Loose fill-dirt can shrink by about 10% to 30% after compaction depending on moisture and how well it is compacted, so order extra to allow for settlement. For small patches use a hand tamper or a vibratory plate compactor in 4-6 inch lifts; for larger areas use a ride-on roller or vibratory drum and seek 90%+ relative compaction for structural fills if the area supports driveways or foundations.

Fill-dirt is fine for raising grade and filling low spots but is not a good wearing surface for driveways because it does not provide drainage or load-bearing strength. For a driveway in North Roby, cap compacted fill-dirt with 4-8 inches of compacted road base or crushed limestone and finish with a 2-3 inch surface layer of crush-and-run or surface stone for durability and drainage.

Some local rules may apply: check Fisher County or the nearest municipal office for fill, grading, floodplain, and right-of-way permits before import. Also ask Hello Gravel about trucking routes and local weight limits—county roads and low-capacity bridges in rural West Texas may restrict truck access or require special hauling permits.

West Texas heat dries and hardens fill-dirt quickly, which can cause cracking if poorly compacted, while intense thunderstorms can cause flash erosion on loose slopes. Freeze-thaw cycles are generally limited but can impact poorly compacted fills in colder winters; good compaction, proper drainage, and erosion control (silt fence, vegetation) reduce these risks.

Suppliers often give better per-ton pricing for full truckloads or large orders; volume discounts in rural West Texas commonly range from a few percent up to 10-15% depending on supplier and distance. Contractor spreading and compaction rates vary—expect operator and machine rates commonly in the range of modest hourly or per-yard fees; remote access and long haul distances will raise costs, so get written estimates that include haul, spreading, and compaction.

Measure the length, width, and the average depth you need filled in feet, multiply to get cubic feet, then divide by 27 to convert to cubic yards; because fill-dirt weighs more than loose volume, plan on roughly 1.1 to 1.3 tons per cubic yard and add 10-25% extra for compaction and settlement. Use Hello Gravel's material calculator or contact our team for a site-specific estimate and to factor in compaction allowances and delivery minimums.