Fill Dirt in Nocona, TX

Typical delivery costs in Nocona range widely depending on distance and order size. Many local suppliers or Hello Gravel deliveries are free for larger orders or short hauls, while small orders or longer hauls commonly add $50 to $300 in delivery fees; request a quote for an exact price for your zip code.

Local suppliers in the Nocona/West Texas area commonly price fill dirt around $10 to $30 per cubic yard delivered, depending on screening, moisture, and quantity. That roughly converts to about $8 to $20 per ton, but weight varies with soil type and water content, so ask suppliers for both volume and ton estimates.

To raise 1,000 square feet by 6 inches you need about 18.5 cubic yards (500 cubic feet / 27). Using a common density range of about 1.0 to 1.3 tons per cubic yard for fill dirt, that equals roughly 19 to 25 tons; order a little extra to allow for compaction and settling.

Fill dirt often contains fines and may be clay-rich, so it generally performs worse for drainage than coarse aggregates. For drainage work in Nocona, use a layer of gravel or crushed stone, or amend the fill with coarse material and slope the site, and consult a local contractor if poor drainage is a recurring issue.

For yards and final grading, screened fill dirt is preferable because it has fewer large rocks and compacts more uniformly. For driveways, even screened fill is not the ideal structural layer—use screened fill to build grade but top with a compacted road base or crusher run for strength and drainage.

Fill dirt used under a driveway can settle over time, especially in clay-prone areas, requiring occasional regrading or additional material. To reduce maintenance, place fill in controlled lifts, compact properly during installation, and finish with a stable base layer designed for traffic.

Crusher run and road base are engineered to interlock and drain, making them the preferred structural material for rural driveways in and around Nocona. Fill dirt is best for building up low spots or changing grade, but it should not be used as the primary wearing course under vehicle traffic.

Install fill dirt in 4- to 6-inch lifts, moisture-condition each lift, and compact each layer with an appropriate compactor to achieve the density specified by your contractor or engineer. Remove organic material, check for utility lines, and allow time for final settlement checks before placing paving or top layers.

Most contracted dump trucks serving Hello Gravel routes are tri-axle trucks carrying about 8 to 14 cubic yards of loose fill dirt per load, though local truck sizes can vary. Standard delivery is 2+ business days with a next-day option for orders placed before noon CST; longer hauling distances, difficult access, or smaller orders typically increase delivery charges.

Yes, uncontrolled fill dirt can settle and cause foundation or slab problems, particularly on clayey or variable soils common in this part of Texas. For any structural foundation, retaining wall, or slab-on-grade where loads matter, use engineered, compacted fill per a geotechnical recommendation and consult a soils engineer before placing large fills near structures.