Fill Dirt in New Caney, TX

Fill dirt is subsoil without large organic material used to raise or level ground. Our local New Caney suppliers deliver fill dirt that reflects regional geology, typically a clay-loam mix used for grading, backfilling, and building pads. Expect color and texture variations based on local sources.

Prices vary by supplier and distance from the source, but typical local pricing ranges are often quoted per ton or per cubic yard—get a live quote on our site for current rates. Hello Gravel requires a 3-ton minimum, offers transparent pricing, and often includes free delivery in many New Caney zip codes.

Hello Gravel connects you with trusted local suppliers and haulers that serve New Caney; specific supplier names are shown at checkout based on your zip code. Typical minimum orders start at 3 tons, standard delivery is 2+ business days, and next-day delivery is available for orders placed before noon CST for an extra fee.

Local clay content increases the need for proper compaction and thinner lifts. For structural work, contractors commonly place fill dirt in 4u0022 to 8u0022 lifts and compact each lift to industry standards (often near 90-95% of standard Proctor) to minimize future settling. For non-structural grading, larger lifts may be acceptable, but compaction and drainage still matter.

Small backyard grading jobs often use 5 to 15 cubic yards (about 6 to 20 tons), driveways or raised approaches commonly need 20 to 50 cubic yards (25 to 65 tons), and building pads or larger site fills typically start at 50 cubic yards and can exceed 200 cubic yards (65+ to 260+ tons). Use a calculator or contact our team for a project-specific estimate based on your dimensions and desired finish.

Permit and stormwater rules can apply depending on the amount of material and whether it affects drainage, lot grading, or septic systems. Check with Montgomery County planning and New Caney municipal offices before substantial imports, and consult a local contractor or county permitting desk if you are unsure.

Hot, dry spells can cause clay-rich fills to shrink and crack while heavy rains increase erosion and settling risk. Proper compaction, good surface drainage, erosion controls (silt fence, straw wattles), and a protective top layer (topsoil, grass, or rock) help preserve the fill and reduce maintenance after storms.

Common add-ons include screening or removing large debris, trucking beyond standard service areas, placement or spreading (tailgate spreading at drivers' discretion), mechanical compaction, grading, geotextile installation, and erosion-control measures. Ask for line-item pricing and confirm whether drivers will perform tailgate spreading, since Hello Gravel notes drivers may do this at their discretion and it is not guaranteed.

Calculate volume: length x width x depth in feet, divided by 27 to get cubic yards. For a 20x30 area raised 6u0022: 20 x 30 x 0.5 = 300 cubic feet, which is 11.11 cubic yards. Multiply by a density factor (commonly 1.2 to 1.4 tons per cubic yard for fill dirt) to get tons, so 11.11 cu yd x 1.25 t/yd3 ≈ 14 tons; round up slightly to allow for compaction and waste.