Gravel in Navarro County, TX

Prices vary by material and supplier, but expect crushed limestone around $20-35 per ton (roughly $25-45 per cubic yard), pea gravel about $30-50 per ton (about $35-60 per cubic yard), and river rock or decorative stone $40-75 per ton (about $45-90 per cubic yard). Local factors like supplier distance to Navarro County, seasonal demand, and bulk discounts affect price. Hello Gravel has a 3-ton minimum and can show live pricing for Corsicana-area deliveries.

Most suppliers serving Navarro County use a 3-ton minimum (Hello Gravel standard) and deliver by tri-axle dump truck. Standard delivery is typically 2+ business days, with next-day delivery possible for orders placed before noon CST for an extra fee; local delivery fees range from free to around $0-100 depending on distance and access. Tailgate spreading may be available at the driver’s discretion but is not guaranteed.

For Navarro County’s clay soils, a stable, well-graded base is key: a 2-3 inch compacted layer of 1-1.5 inch crushed stone or recycled concrete for the base, topped with 3/4-inch crushed limestone or 21A (also called 57/67 mix) for the wearing surface works well. Avoid loose pea gravel on driving lanes because it shifts and ruts under heavy vehicles. Add geotextile fabric and proper drainage to reduce pooling and washouts in hot, wet weather.

Measure length x width x depth in feet, divide by 27 to get cubic yards, then multiply by 1.2–1.4 to convert to tons depending on material density and expected compaction. For Navarro County’s clay and likely settling, use the upper end (about 1.3–1.4 tons per cubic yard) to allow for compaction and uneven subgrade. Example: a 100 ft x 12 ft driveway at 4 inches deep is about 14.8 cubic yards, so order roughly 19–21 tons; Hello Gravel’s calculator can do this automatically.

Navarro County’s clay soils drain slowly, so gravel surfaces can develop ruts, pooling, and erosion if not crowned and properly drained. Install a crowned surface, side ditches, culverts at low spots, and consider geotextile fabric under the base to limit mixing with clay subsoil. Regular grading after storms and maintaining vegetation in adjacent areas will reduce washouts and sediment buildup.

Requirements vary: most private residential driveways in Navarro County do not need a permit, but new or modified entrances onto county roads or state routes typically require county or TxDOT approval and a driveway permit. Corsicana city limits may have their own rules or standards for curb cuts and drainage, so check with Navarro County Public Works or the Corsicana city permitting office before construction. Hello Gravel can remind you to verify permits before delivery.

Contractors commonly provide site prep and grading, geotextile installation, base rock placement, spreading, and compaction. Pricing varies with project size and site conditions; expect site prep and grading from a few hundred to a few thousand dollars depending on work needed, and spreading/compaction labor often quoted per ton or by day (spread/compact may run roughly $15-40 per ton as a general range). Get local quotes because heavy clay, long driveways, or difficult access increase costs.

Stabilizers and rigid binders (resin systems, polymer treatments, or interlocking grids) can significantly reduce rutting and migration on clay soils if combined with a solid base and good drainage. Costs vary: polymer or resin treatments and installed grids commonly range from about $0.75 to $3.00 per square foot depending on product and installation complexity. For Navarro County conditions, these systems are more effective when used with proper base prep and professional installation.

With proper base, drainage, and periodic maintenance, a gravel driveway in Navarro County typically lasts 10-20 years before major renewal, but it will need intermittent upkeep. Plan to grade and refill low spots after heavy rains and add 1-2 inches of new surface gravel every 2-5 years depending on traffic. High-traffic lanes or farm roads may need more frequent regrading and topping.

Gravel has the lowest upfront cost but higher ongoing maintenance: a typical single-driveway gravel installation is often a fraction of asphalt or concrete cost, while asphalt and concrete require larger initial investments. Longevity with maintenance: gravel 10-20 years, asphalt 15-25 years with sealcoating and repairs, and concrete 25-40 years, but local clay soils and drainage issues can shorten all surfaces without proper base. Choose gravel for lower initial cost and easier repairs, asphalt for smoother surface with moderate cost, and concrete for long-term durability where drainage and base can be properly managed.