Gravel in Morgan's Point Resort, TX

Prices vary by gravel type, supplier, and delivery distance, but typical delivered gravel in the Texas Region runs about $25 to $60 per ton (rough estimate) or roughly $35 to $90 per cubic yard. Specialty materials (pea gravel, colored stone) tend toward the higher end. Final price depends on your zip code, order size (minimum 3 tons), and whether you need next-day delivery or spreading.

For lake-adjacent, humid Texas conditions, crushed limestone (3/4u0022 with fines) is a common choice because it compacts well and sheds water. Crushed granite is also durable and attractive, while pea gravel looks nice but can shift and track more, so it is less ideal for driveways unless contained. Consider a layered approach: a larger base rock (1u0022-2u0022) with a compactable top layer for best performance.

A 12 ft x 40 ft driveway at 3 inches deep is about 4.45 cubic yards, which equals roughly 5.5 to 6.0 tons of gravel depending on material density. We recommend ordering a little extra (5%-10%) to allow for compaction and spreading, so plan on about 5 to 7 tons. Remember Hello Gravel's minimum order is 3 tons, and you can use our material calculator to get an exact recommendation for your chosen stone.

Standard delivery is usually 2+ business days from order confirmation, and next-day delivery is often available for orders placed before noon CST for an extra fee. Actual lead time depends on supplier availability and local trucking schedules. Check delivery options at checkout or contact our team to confirm timing for your address.

Yes, properly installed gravel performs well in hot, humid conditions and sheds water better than some solid surfaces. Success depends on proper base preparation, compaction, and drainage; without those, rutting and washouts are more likely during heavy storms. For lakefront sites, use geotextile fabric under the base and consider larger stone in high-flow areas to reduce erosion.

Geotextile fabric under the gravel is recommended for soft or silty lake-adjacent soils because it separates the subgrade and helps prevent mixing and sinking. Gravel stabilizers or polymer grids can improve load distribution and reduce rutting and tracking, particularly on slopes or high-traffic driveways. These products add cost but can reduce maintenance and are worth considering for challenging soils.

Gravel usually has the lowest upfront cost—often $1 to $3 per square foot installed—while asphalt is mid-range and concrete is usually highest in initial cost. Gravel requires more frequent maintenance (regrading, topping up) but lower initial investment; asphalt and concrete need less frequent upkeep but cost more to repair when damaged. Choose based on budget, desired appearance, maintenance willingness, and local drainage needs near the lake.

Expect routine maintenance such as annual or semiannual grading to smooth ruts, filling low spots, and adding 1/4u0022 to 1u0022 of new gravel every 2 to 5 years depending on traffic. Keep edges contained with timber, pavers, or metal edging to limit spread, and clear vegetation and debris to prevent potholes. Good drainage and occasional compaction after heavy storms will extend the life of the surface.

Yes, gravel can improve surface drainage compared with impervious surfaces because it allows water to infiltrate and flow. Angular crushed stone with a well-graded base works best for drainage and load-bearing—use larger stones in the base and smaller, compactable stone on top. For concentrated runoff areas, consider riprap or larger rock and engineered channels to protect against erosion.

Local ordinances and HOA rules vary, so check with the City of Morgan's Point Resort and your HOA before installing a gravel driveway or changing landscaping. Some HOAs have guidelines about appearance, edging, or material type, and the city may have stormwater or impervious surface rules for lakefront lots. If you need help, contact our team and we can point you toward local resources to verify requirements.

Gravel can be an affordable, permeable option around pools and patios, but small loose stones can be tracked into the pool and may be uncomfortable bare-footed. Decomposed granite compacts smoother and is visually similar to paver sand, while pavers offer a cleaner, low-maintenance surface at higher cost. Consider the area use, desire for bare-foot comfort, and maintenance tolerance when choosing; a mix of edging and denser materials helps keep loose gravel out of pool areas.