Fill Dirt in Mont Belvieu, TX

Fill dirt is native soil or subsoil with low organic matter used to raise grades, fill holes, or build up areas before final surfacing. In Mont Belvieu it is commonly used for yard grading and raising low spots, but it is not usually a finished driving surface—use a compacted granular base or crusher run on top for driveways. Because Gulf Coast soils can be clayey and expansive, check with a contractor if you need structural support or drainage work.

Typical delivered prices for basic, non-engineered fill dirt in the Mont Belvieu area generally run about $12 to $25 per ton, or roughly $16 to $35 per cubic yard. Prices vary with moisture content, screening, distance, and truck size, so view these as estimates and get a live quote for your ZIP code. Hello Gravel can show local supplier prices and delivery options for exact costs.

Hello Gravel connects you with local suppliers and haulers that serve Mont Belvieu and nearby Baytown and Chambers County yards, so the fastest route is to check availability using your ZIP on our site. You can also contact local landscape supply yards or quarries in the region, but ordering through Hello Gravel gives you scheduled delivery and transparent pricing. Minimum orders are typically around 3 tons for truck deliveries.

Measure the area in square feet, multiply by the desired depth in feet, then divide by 27 to get cubic yards (area x depth / 27). Add a 10-30% extra for compaction and settling; multiply cubic yards by about 1.2 to 1.4 to convert to tons (1.3 tons/yd is a common estimate). Example: a 20 x 30 ft area at 6 inches deep is 11.1 yd3, so plan on ~14 to 16 tons depending on moisture and compaction.

You should check with Mont Belvieu City Hall and any HOA before bringing in significant fill—permits or grading approvals may be required if changing drainage, altering elevations, or impacting floodplains. Mont Belvieu and Chambers County have areas near flood zones, so fill that affects base flood elevations or drainage can trigger reviews. When in doubt, contact local planning or your HOA and document approvals before delivery.

Delivery fees depend on order size, site access, and distance; within 20 miles many suppliers or Hello Gravel partners may offer free or low-cost delivery for typical loads, but fees commonly range from $0 to $150 for smaller orders or difficult access. Additional charges can apply for next-day delivery, tight access, long driveways, or if tailgate spreading is requested. We recommend requesting a delivery quote during checkout so you see any fees up front.

For general yard grading, screened fill dirt with low organic content is preferred because it compacts well and settles predictably. For driveways, fill dirt alone is not ideal; contractors typically place compacted fill to raise grade then install an engineered base or crusher run/gravel surface for load-bearing and drainage. In Gulf Coast areas with expansive clays, consider adding granular layers or geotextile fabric to reduce movement and improve drainage.

Place fill dirt in thin lifts (typically 4 to 8 inches), compact each lift with proper equipment, and aim for 90% or higher relative compaction for structural areas. Design surface grading to move water away from foundations, and consider sub-surface drainage or using granular backfill where surface water and expansive clay are concerns. If your project affects structures or driveways, a soil test and contractor guidance are recommended.

Screened fill dirt is usually less expensive than crusher run because it is soil without crushed stone; in the Mont Belvieu area screened fill often ranges lower per ton while crusher run (a mix of stone and fines) commonly costs 20% to 50% more. Exact differences depend on supplier, truckload size, and local material availability, so get quotes for both materials and include placement and compaction costs in your comparison. Remember crusher run performs much better as a driveway base than fill dirt alone.

As a subgrade material properly placed and compacted, fill dirt can remain stable for many years, but it is not a durable wearing surface and can settle or wash if not covered with a proper base and surfacing. For driveway use expect periodic maintenance like regrading edges, adding base material, and addressing low spots after heavy rain events—especially important in Mont Belvieu’s coastal-influenced weather. For heavy-use areas, plan on installing a compacted granular base or engineered base over the fill to minimize maintenance.

Most local contractors prefer engineered base material and properly compacted structural fill for heavy equipment pads and garage slabs rather than plain fill dirt, because engineered materials provide predictable load-bearing and better drainage. Fill dirt is commonly used for bulk raising and non-structural grading, but critical pads and slabs typically require engineered fill, compaction testing, and sometimes geotextiles. Discuss project-specific requirements with a contractor or geotechnical specialist for the best results.