Fill Dirt in Lower Kirby, TX

Fill-dirt is typically unprocessed subsoil used to raise grades, fill low spots, or build up a pad before final surfacing. In Lower Kirby it is commonly used to level yards, build up under driveways or garage pads, and to correct drainage low spots, but it is not usually suitable as a finished driveway surface without a rock base or paving.

Prices vary by supplier, distance, and material quality, but expect delivered fill-dirt in Lower Kirby to generally run about $10 to $25 per cubic yard (roughly $8 to $19 per ton, depending on density). These are estimates only; final price depends on local availability, truck access, and any processing or hauling fees, so check your zip code for exact quotes.

Hello Gravel works with multiple local suppliers and haulers that service Lower Kirby; specific supplier names depend on your zip code. Common minimums in the area are 3 tons (our platform minimum), and typical delivery trucks are tri-axle dump trucks carrying roughly 12 to 15 tons per load; smaller loads or special trucks may be available on request, so confirm minimum order, truck type, and access requirements when you get a quote.

Lower Kirby soils often contain clay that holds water and can shrink or swell; when combined with heavy seasonal rains this makes uncompacted fill-dirt prone to settling, rutting, and poor drainage. For driveways and building pads, plan on proper compaction in lifts, good surface drainage, and usually adding a well-draining base (crushed stone) above the fill-dirt to protect the surface and reduce water-related movement.

Quantities depend on desired depth and compaction, but typical estimates: 1-car driveway (10 x 20 ft) at 3 to 4 in depth = about 2.5 to 3.5 cubic yards (roughly 3 to 5 tons). 2-car driveway (20 x 20 ft) at 3 to 4 in = about 5 to 7 cubic yards (roughly 6 to 9 tons). 20 x 40 ft building pad at 6 to 8 in = about 15 to 20 cubic yards (roughly 18 to 26 tons). Always order a bit extra (5% to 10%) to account for compaction and grading.

Fill-dirt is inexpensive for raising grade but is not an ideal structural base: it compacts poorly for traffic and can retain moisture under heavy Texas rains. Crusher run (a mix of crushed stone and fines) provides a stable, compactable base that drains better and holds up to traffic, while crusher fines give a smoother finish but may need edging. For Lower Kirby, use fill-dirt to adjust grade, then place crusher run as the structural base and a suitable surface material on top for best long-term performance.

Many residential projects require checking city or county permitting for grading, drainage changes, or adding significant amounts of fill; some HOAs restrict visible materials, driveway surfaces, or the placement of large fill piles. Before ordering, contact your city or county permitting office and your HOA to confirm any rules, and mention erosion control (silt fencing) and neighbor access if you expect large deliveries.