Gravel in Livingston, TX

A typical tri-axle dump truck in the Livingston area carries about 10 to 12 tons. Expect a delivered load to cost roughly $350 to $900 depending on material type, local supplier rates, and delivery distance; Hello Gravel requires a 3-ton minimum and may offer free delivery in some zip codes. Ask for a quote to get a precise price for your address and material choice.

Prices vary by type (pea gravel, crushed stone, crusher-run) but 1 ton in the Livingston area commonly runs about $35 to $75. Final price depends on material, quantity, and delivery; larger orders typically lower the per-ton price.

Buying bulk by the ton and having it delivered in a dump truck is usually the most economical route. Consider recycled crushed concrete or crusher-run from local suppliers for lower-cost base material, and compare quotes from local yards or use Hello Gravel to get multiple supplier options.

Assuming a 20 ft long by 10 ft wide driveway (200 sq ft), you will need about 2 tons at 2u0022 depth and about 3 to 4 tons at 3u0022 to 4u0022 depth. With local prices of $35 to $75 per ton, material cost typically ranges $70 to $300; factor in delivery, minimum order (3 tons), and any spreading fees.

Two inches can work for a short-term or light-use path, but it is thin for a driveway that will carry regular vehicles. For lasting performance in Livingston's soils, plan on 3 to 4 inches of gravel over a compacted base and consider geotextile on softer ground.

For a 100 ft by 10 ft driveway (1,000 sq ft), approximate needs are: 2u0022 depth = about 9 tons, 3u0022 = about 13 tons, 4u0022 = about 17 tons. Local soil, compaction, and base preparation can change these numbers, so measure your actual width and desired depth before ordering.

A 20x20 pad is 400 sq ft and requires roughly 3 to 4 tons at 2u0022 depth and 5 to 6 tons at 3u0022 depth. With local per-ton pricing ($35 to $75), expect material costs in the $120 to $450 range plus delivery and any spreading charges; Hello Gravel's minimum 3-ton order often applies.

Crusher-run (also called road base) and recycled crushed concrete are typically the least expensive and make a strong base for driveways. They compact well and are commonly available from local suppliers, though the color and texture will reflect regional sourcing.

Reclaimed asphalt millings and crushed concrete are common lower-cost alternatives that compact into a firm surface. Permeable pavers or stabilized gravel mixes can be cost-effective over time but may have higher upfront installation costs.

One cubic yard (27 cubic feet) covers about 162 sq ft at 2u0022 depth, about 108 sq ft at 3u0022 depth, and about 81 sq ft at 4u0022 depth. In weight, 1 cubic yard of typical crushed stone is about 1.3 to 1.5 tons, depending on material and moisture.

A layered approach works best: 1) crusher-run or road base for the compacted subbase, and 2) 3/4u0022 crushed stone or #57 for the top wearing layer. Pea gravel is sometimes used for a finished look but can move under vehicle traffic; consult local suppliers on what works best for Livingston soils.

Yes. Low-lying or flood-prone lots near Lake Livingston may need thicker base material, better drainage, and geotextile fabric to prevent washout. Also expect possible delivery route restrictions or timing changes after heavy rains; mention proximity to the lake when getting quotes so suppliers can plan appropriately.