Fill Dirt in Lipscomb, TX

Delivered fill dirt prices in the Lipscomb/West Texas area commonly fall in a broad range because of haul distance and local supply. Expect roughly $10 to $30 per ton delivered, with lower prices near production sites and higher costs for long hauls, small orders, or difficult access. Contact Hello Gravel for a zip-code specific quote and note our 3-ton minimum.

To raise 1,000 sq ft by 3 inches you need about 9.3 cubic yards (roughly 12 tons); for 6 inches you need about 18.5 cubic yards (roughly 24 tons). We recommend ordering 5-10% extra to allow for compaction and settlement, so plan on about 13–27 tons total depending on final depth and compaction.

Lipscomb sits in the semi-arid High Plains where soils range from sandy loams to clay or clay-loam subsoils depending on exact location. Fill dirt works well to raise grades and backfill but performs differently: it compacts better on sandy soils and can be prone to shrink-swell on clayey soils. Always check a local soil test for bearing and drainage before large fills.

Hello Gravel connects you with local suppliers and contracted haulers that serve Lipscomb and surrounding towns; exact names vary by zip code. Many suppliers offer volume discounts for larger loads, and Hello Gravel can get competitive pricing on bulk orders—contact our sales team for quotes and to ask about discounts.

For structural fills and driveway subgrades, compact fill dirt in 4-6 inch lifts and aim for a firm, uniform surface; engineers commonly target 90-95% relative compaction depending on spec. Use a vibratory plate compactor for small areas and a vibratory roller or sheepsfoot roller for larger fills. Moisture conditioning (light wetting or drying) before compaction often improves results.

Semi-arid droughts can cause fine soils to shrink and settle, while occasional freeze/thaw cycles can cause surface heaving and minor settlement in colder months. Proper compaction, good drainage, and capping with topsoil or gravel reduce long-term movement and maintenance. Expect some settling and plan to top-dress or regrade low spots after the first season.

Permitting rules vary by project size and location; small yard fills often need no permit, but larger grading, changes to drainage, or fills near roads and streams may require county approval. Check with the Carson County planning or road office and the Town of Lipscomb for local rules, and contact the county health department if septic or drainage is involved.

Fill dirt is appropriate for general grade raising and non-structural backfill, but it is not usually the best stand-alone base for driveways and roads where load-bearing and drainage are required. For driveways and farm roads, crushed stone, road base, or crusher run are preferred for stability and drainage. Septic systems must meet county health department specs, and native or engineered soils are generally required for drain fields rather than generic fill dirt.

Fill dirt is the least expensive option and fine for raising low areas, but it provides poor drainage and less stability under vehicle loads. Crusher run and road base are more expensive but deliver superior compaction, load-bearing capacity, and drainage—making them the better long-term choice for driveways and access roads. For many rural projects a combination works: use fill dirt to set grade then cap with road base or crusher run for the driving surface.

Standard delivery through Hello Gravel is typically 2+ business days, with next-day availability for orders placed before noon CST for an extra fee. Prices can rise in spring and fall when demand is highest and may increase after heavy local storms or during wet seasons when sourcing and hauling become harder. Always check current pricing and availability for your zip code before scheduling a delivery.