Fill Dirt in Landon Branch, TX

Delivered fill-dirt prices in the Landon Branch area typically range from about $12 to $30 per ton (roughly $16 to $40 per cubic yard), depending on source, moisture content, and distance from the supplier. Regional variation and seasonal demand affect price, so use our zip-code quote tool or contact our team for an exact delivered price for your address.

Hello Gravel requires a minimum order of 3 tons and standard delivery is 2+ business days; next-day delivery is available for orders placed before noon CST for an extra fee. Many Landon Branch deliveries have low or free delivery within our network, but fees can range from about $25 to $150 depending on truck access, distance, and whether tailgate spreading is requested.

Landon Branch's hot, humid climate and local clay-rich soils increase the risk of shrink-swell, poor drainage, and erosion if fill-dirt is not properly placed and compacted. For driveways and grading, plan for good compaction, positive surface slope to shed water, and a well-draining base layer (crushed stone or gravel) under any surface material to reduce rutting and washouts after heavy rains.

To raise 1,000 sq ft: 2 inches = about 6.2 cubic yards (≈ 8.0 tons), 4 inches = about 12.4 cubic yards (≈ 16.1 tons), 6 inches = about 18.5 cubic yards (≈ 24.1 tons). These estimates assume typical fill-dirt density (~1.3 tons per cubic yard); order 5-10% extra to allow for compaction and waste.

For Landon Branch projects, a well-graded structural fill (a mix of sand, silt, and some fines) is preferred for compaction and stability, while sandy or gravelly mixes are better where drainage is a priority. Avoid using topsoil or organic-rich dirt as fill; if you need both drainage and compaction, contractors often place a compactable fill layer and then a coarse gravel base for surface drainage.

Contractors typically use engineered, compacted fill for building pads but rarely use plain fill-dirt alone for septic drainfields or finished driveways. Septic drainfields need free-draining sand or gravel per health-department specs, and driveways usually perform better with a compacted fill base plus a crushed stone or gravel wearing surface.

Properly placed and compacted fill-dirt used for grading will perform for many years, but unprotected surfaces can erode or settle after heavy summer storms. Expect occasional regrading, adding a few inches of material in low spots, and maintaining drainage features; surfaces used for traffic will require a gravel wearing layer to avoid rutting.

Local rules vary: small yard grading usually does not need a permit, but substantial changes to grade, driveways, retaining walls, or work near property lines and waterways often trigger county or city permits and drainage review. Check with your Landon Branch city office or county engineering department before large fill projects, and consult an engineer for building pads or any change that affects drainage or nearby properties.

For small areas and lifts up to 4-6 inches, a plate compactor or walk-behind tamper is usually sufficient; for larger areas or deeper fills use a skid-steer, roller, or vibratory compactor and place fill in 4-6 inch lifts. If the project is structural (building pad, retaining wall), contractors will compact by lift and may provide compaction testing to meet local specs.

Hello Gravel connects you with local suppliers and dump-truck haulers that serve the Landon Branch area, including regional quarries and dirt pits. Standard lead time is 2+ business days, but availability can tighten in wet seasons or high-demand periods; request a quote and schedule on our site to confirm current availability and exact delivery timing.