Fill Dirt in Knox County, TX

Delivered fill-dirt prices in rural Knox County typically range from about $10 to $25 per ton, depending on sourcing distance, moisture, and truck access. If you prefer price per cubic yard, expect roughly $12 to $30 per cubic yard (using an approximate conversion of 1 cubic yard = 1.2 tons). Final price depends on your exact zip code, minimum order size, and any delivery fees.

Hello Gravel connects you with local suppliers and contracted haulers who service Knox County; many local suppliers require a minimum order of about 3 tons (our platform minimum). In rural areas the material may be sourced from neighboring counties, which can affect delivery radius and add travel fees, so check availability by entering your zip code.

Simple estimates: to raise a 20' x 40' area by 4 inches you need about 10 cubic yards (≈12 tons); to raise a 50' x 50' yard by 6 inches you need about 46 cubic yards (≈55 tons); a 10' x 10' pad at 6 inches requires about 2.1 cubic yards (≈2.5 tons). These are material volumes only—allow extra for compaction (10-20% more) and for grading or settlement over time.

Fill-dirt works well for bulk grading and raising low spots in Knox County, but its suitability depends on composition. For long-term stability in hot, dry conditions you want subsoil with low organic content and good compaction; for drainage-prone areas choose sandier or well-graded mixes rather than sticky clay. For driveways and pads, pair fill-dirt with an engineered base (crushed rock) rather than leaving fill-dirt as the wearing surface.

Ask suppliers for clean fill or subsoil (minimal topsoil and organic matter) for structural fills and grading, and for a well-graded aggregate if you need improved drainage. If you need a compactable base under slabs, request fill with some fines that compact well but avoid high-organic topsoil. Be explicit in Order Notes if you need sandy fill, clayey fill, or erosion-control mixes—regional availability will vary.

Labor and equipment costs vary: small equipment rental (plate compactor) is often $80-$200/day, skid steer or mini-excavator rental is $150-$350/day, and contractor labor can run $75-$150/hour. Many contractors price spreading and compaction by the job; expect roughly $5-$15 per cubic yard for professional spreading and compaction on typical residential jobs, depending on site access and slope.

Permitting rules vary by project type; simple yard grading usually does not need a permit, but structural fills under building foundations, commercial pads, or septic system work often require county or state approval and engineered plans. Always check with the Knox County courthouse or local building and health officials before placing large volumes of fill; your contractor or Hello Gravel sales rep can help point you to the right local contacts.

Use fill-dirt to raise grade, build subgrade, and fill low spots—it is not intended as a finished surface. Choose crushed rock or crushed stone for driveways, pads, and any surface that needs load-bearing and drainage. Use topsoil only for planting and landscaping where vegetation will grow; mixing topsoil and fill-dirt will reduce compaction quality and stability.

Common extra fees include long-haul charges when material is sourced from outside the county, additional fees for off-route or hard-to-reach drop locations, and extra charges if trucks must navigate rough driveways or require gate opening. Hello Gravel’s minimum order is 3 tons, and drivers may charge extra for short-notice or next-day deliveries and for services like tailgate spreading, which is provided at the driver's discretion.

Yes—fill-dirt will settle as it consolidates, especially if placed in lifts without adequate compaction or over organic soils. Plan to overfill by 10-20% or allow time and regrade after settlement before installing final surfaces, and have the material properly compacted in lifts to reduce long-term settlement.

Use Hello Gravel’s material calculator or enter your project dimensions on our site to get an estimate, keeping in mind our 3-ton minimum and regional sourcing. Check your zip code for availability, choose a delivery date at checkout (standard delivery is 2+ business days, next-day may be available), and add site notes about access or spreading requests so the hauler can assess delivery conditions.