Fill Dirt in Kleberg County, TX

In Kleberg County, standard deliveries are often included for short hauls, but rural drops commonly incur an extra fee for distance or difficult access. Expect additional delivery charges of roughly $25 to $125 depending on distance from the supplier and site conditions; very remote loads or those requiring off-road access may be higher. Hello Gravel requires a 3-ton minimum and offers scheduled delivery windows (standard 2+ business days or next‑day for an additional fee), and drivers may assess conditions on arrival before dumping or spreading.

Screened fill-dirt prices in the Texas Coastal Bend typically range from about $10 to $25 per ton, or roughly $15 to $40 per cubic yard, depending on moisture content, screening, and local supply. Prices trend higher if material is screened, delivered far from the quarry, or if you request added services like spreading. For a firm quote for your Kleberg County address, check your zip code on Hello Gravel to see local supplier rates.

Yes. Hello Gravel connects customers with local, vetted suppliers and contracted haulers that serve Kleberg County and nearby cities such as Kingsville and the Coastal Bend region. If you need spreading or compaction services, request that at checkout and we will pass the note to the driver and supplier; spreading is at the driver's discretion and may incur extra charges from the hauler.

Fill-dirt performs well for raising grades and general backfill in Kleberg County when properly placed and compacted, but coastal conditions mean extra attention to drainage and erosion control. High humidity and occasional salt exposure can affect topsoil and plant growth but usually do not damage inert fill-dirt; however, locations with a high water table or poor drainage will need engineered fill or added drainage layers. For driveways and building pads, use well-draining layers and consider capped layers of base rock to reduce washout during heavy rains.

Requirements vary by project type and local jurisdiction; Kleberg County and the City of Kingsville may have different permitting and compaction standards. As a common practice, municipalities and engineers ask for 90% to 95% of standard Proctor compaction for structural fills beneath foundations and drives, and compaction tests are often required for permit inspections. Always check with the Kleberg County building office or your project engineer before placing fill-dirt for foundation or permitted work.

Use these rough estimates: for a 1-car driveway 10 ft x 20 ft with a 6-inch base you need about 3.7 cubic yards (~4 to 6 tons). To raise a 1,000 sq ft lot by 3 inches requires about 9.3 cubic yards (~11 to 14 tons), and backfilling a 3 ft deep trench 100 ft long needs about 37 cubic yards (~45 to 55 tons). Note that 1 cubic yard of fill-dirt typically weighs about 1.2 to 1.6 tons depending on moisture and compaction, so always calculate using your desired finished depth and request a small overage for settlement.

Dump trucks used by Hello Gravel are typically tri-axle trucks that need clear, level access and room to maneuver; narrow drives, low-hanging wires, or soft ground can prevent safe dumping. Mark your desired drop location, clear vehicles and obstructions, and call customer service if access is tight; drivers will assess safety on arrival and may refuse to dump if the site is unsafe. If you want tailgate spreading, request it at checkout but expect the driver to decide if it can be done safely; spreading is not guaranteed.

Prepare a stable base by removing organic topsoil where structural fill is needed and install temporary erosion controls if you are working before the rainy season. Grade for positive drainage away from foundations, use geotextile fabric or a crushed-rock layer under heavy use areas, and compact fill in 6- to 8-inch lifts to reduce future settlement. For coastal locations, protect slopes with vegetation or erosion blanket and consider a permittable engineered solution if you have a high water table or flood-prone site.

Contact Hello Gravel as soon as possible; modifications are easier before your order is dispatched and we will do our best to accommodate schedule or quantity changes. Changes requested after dispatch or during delivery may not be possible and additional charges from the supplier or hauler could apply. If you have an issue with delivery or material, contact customer service promptly so we can work to resolve it.