Fill Dirt in Jacinto City, TX

Typical delivered price for fill dirt in the Jacinto City area usually ranges from about $8 to $25 per ton, which is roughly $10 to $33 per cubic yard depending on moisture and compaction. Prices vary with truck distance, local availability, and season; contact Hello Gravel for an exact, zip-code based quote and remember our minimum order is 3 tons.

Extra fees can apply for long haul distances, tricky access, or if the delivery requires offloading outside normal spots. Hello Gravel shows transparent pricing at checkout and any additional fees will be noted on your quote; ask our team if you have questions about driveways, alleys, or restricted access.

Fill dirt should be placed in lifts and compacted to reduce settlement; contractors typically place 6 to 8 inch lifts and compact each lift with a plate compactor, roller, or vibratory drum. For driveways or vehicle loads, use an engineered base or road base on top of compacted fill, and consider a compaction test for critical structures.

West Texas weather—hot, dry spells followed by heavy seasonal rains—can increase shrink-swell and uneven settling of loose fill. Proper compaction, grading for surface drainage away from structures, and adding a stable base layer are important to limit movement after storms.

For structural areas, avoid loose organic topsoil; use a clean, compactable fill with a mix of sand, silt, and small gravel that compacts well. For driveways and foundations, a compacted engineered fill or class II road base is preferred as the top structural layer; plain fill dirt is better for raising grades or under that structural layer.

You may need permits for significant grading, raising lot elevations, or altering drainage, and some HOAs restrict visible changes or require approvals. Check with the Jacinto City building or planning department and your HOA before ordering large deliveries to avoid fines or required removal.

Measure the area in square feet, multiply by the desired depth in feet, then divide by 27 to get cubic yards (area ft2 x depth ft / 27 = cubic yards). Convert to tons using an approximate conversion of 1 cubic yard = 1.1 to 1.35 tons for compactable fill dirt, and contact Hello Gravel if you want us to calculate it for you.

For a driveway subgrade, class II road base or crushed limestone provides a stronger, better-draining structural layer than plain fill dirt. Use fill dirt to raise grades or fill low spots, but install and compact a road base or engineered aggregate on top for the actual driving surface.

Standard delivery is typically 2+ business days from order, and next-day delivery is available for orders placed before noon CST with an additional fee. During peak construction season lead times can extend, so check zip-code availability on Hello Gravel and request your preferred date when you order.

You may see the most settlement in the first several months after placement, especially after heavy rains; minor settling can continue for up to a year. Inspect the area after big storm events and again at 3 to 6 months; plan to top off low spots or regrade as needed, and consider proper compaction up front to minimize repeat additions.

Provide a clear, level drop location and note access constraints in Order Notes so drivers can assess tailgate spreading or offload placement on arrival. Because materials are locally sourced and appearance varies, add color or material notes when ordering and contact Hello Gravel for site-specific advice or hauling constraints.