Decorative Stone & Rock in Irving, TX

Delivered prices in Irving vary with stone type and size. Expect a general range of about $35-$70 per ton for common decorative crushed limestone or pea gravel, $50-$120 per ton for granite and colored crushed stone, and $80-$150+ per ton for larger river rock. Prices depend on availability, color, and seasonal demand, so check your zip code on Hello Gravel for current local quotes.

The most popular choices in Dallas–Fort Worth are crushed limestone, pea gravel, river rock, and granite. Crushed limestone is a budget-friendly, durable option; pea gravel is good for informal walkways; river rock is chosen for appearance and drainage; and granite is selected for color and long-term durability. Regional suppliers stock different mixes, so availability and hues reflect local geology.

Many local quarries and landscape supply yards in the Dallas–Fort Worth region offer delivery and some offer installation or can refer installers. Hello Gravel connects you with suppliers that provide dump-truck delivery to Irving addresses; installation services vary by supplier and contractor. If you need installation, request it in Order Notes or contact our team for recommendations and quotes.

Use this practical rule: one ton covers about 231 sq ft at 1u0022 depth, about 116 sq ft at 2u0022 depth, and about 77 sq ft at 3u0022 depth. These figures assume typical crushed-stone density (roughly 1.4 tons per cubic yard) and are a good guide for planning. For irregular stones or very dense rock, order a bit extra and use our material calculator to confirm quantities.

Decorative stone can last many years in Irving—typically 5-20+ years—depending on traffic, stone type, and installation quality. Expect occasional maintenance like raking, removing debris, topping up thin spots every few years, and controlling weeds with edging and targeted herbicide or periodic spot digging. Proper base prep and edging reduce maintenance and keep the stone from migrating into yards and beds.

Stone handles hot, humid summers well: it does not rot or attract pests and tolerates heat, though lighter stones can fade slightly with long sun exposure. For heavy rains, stone provides good drainage if installed over a proper base and with adequate slope; loose fines can wash into gutters without edging and periodic replenishment. Use a stable base and consider a permeable weed fabric only where needed to prevent washout and maintain infiltration.

For walkways, decorative stone offers durability and drainage superior to mulch and generally lasts longer than decomposed granite (DG) before needing replacement. DG compacts into a firm surface that is natural-looking and good for low-traffic paths but can rut or erode in heavy rain. For driveways, crushed stone or gravel is preferred for load-bearing strength; mulch and DG are not recommended for vehicle areas because they break down faster and need frequent maintenance.

Best practices include removing topsoil, installing a compacted base (4-6u0022 for drive areas, 2-4u0022 for walkways), using edging to contain the stone, and compacting layers with a plate compactor where appropriate. Consider a permeable fabric to limit weeds while allowing drainage, especially on Irving's clay soils where water can pool. Slope surfaces away from buildings, and add a finishing layer of decorative stone sized for the look and function you want.

Rules vary by neighborhood: many Irving homeowners can replace lawns or beds with decorative rock without a city permit, but HOA covenants often restrict color, rock size, or front-yard coverage. Before ordering, check your HOA guidelines and contact City of Irving zoning or code enforcement if you have questions about visible frontage or driveway changes. When in doubt, save time by getting written HOA approval and documenting any city code checks.

Installed prices vary widely based on prep, edging, stone type, and access. Expect basic decorative rock installation in DFW to range roughly $3-$8 per sq ft for common materials and prep; premium stone, complex grading, or extensive base work can push costs to $8-$15+ per sq ft. For larger jobs, installers often price by ton plus labor; material-plus-delivery from Hello Gravel combined with local spreading labor typically results in total costs that depend on the project's size and difficulty, so get multiple local quotes.

Use our material calculator to estimate tons based on area and depth, and choose your preferred delivery date at checkout for faster scheduling. Add color or placement notes in Order Notes, request tailgate spreading if you want the driver to assess it, and call our team if you need help with quantities or installer referrals. Always check your access route and any HOA rules before delivery to avoid delays.