Fill Dirt in Hillsboro, TX

Fill dirt is subsoil used to raise or level ground; it contains little organic matter and doesn't support plant growth the way topsoil does. In Hillsboro and West Texas you may also see caliche or clay-heavy fill that compacts well for grading but is not suitable for planting without topsoil added.

Prices vary by supplier, truck size, and delivery distance, but a 10-yard dump truck load in the Hillsboro area commonly falls within a moderate range depending on regional supply. For an exact price, check your zip code on Hello Gravel or request a quote since delivery fees and local availability affect final cost.

Fill dirt is most commonly sold by the cubic yard rather than by the ton, because volume matters more for grading and filling. Suppliers in West Texas may give both options, so ask for cubic yards on your quote and confirm whether the price includes delivery and dumping.

The least expensive options are using on-site excavated material, picking up surplus soil from local construction jobs (with permission), or ordering local subsoil from a nearby supplier to avoid long hauls. Hello Gravel can compare local suppliers and delivery costs to identify the most cost-effective option for your project.

Fill dirt is usually the cheapest material if your goal is to raise grade or fill holes because it is unamended subsoil with little organics. However, it is not suitable for planting or finishing surfaces; if you need a finished lawn or garden, budget for topsoil on top of fill dirt or consider alternatives.

Calculate cubic yards by multiplying length (ft) × width (ft) × depth (inches) and dividing by 324. For example, a 100 ft × 10 ft driveway at 4 inches of fill requires about 12.4 cubic yards, so order slightly more to account for compaction and settling and confirm exact quantities with your supplier.

No, 2 inches of fill dirt is too thin for a driveway base and will settle quickly. For grading and to create a stable subgrade you should plan on 4 to 6 inches of compacted fill, plus an appropriate aggregate base and surface material for driving areas.

One cubic yard equals 27 cubic feet (a 3 ft × 3 ft × 3 ft cube). Depending on spread depth, 1 cubic yard covers about 324 sq ft at 1/4 inch, 162 sq ft at 1/2 inch, or about 20 sq ft at 4 inches, so match coverage to the depth you need.

Ten cubic yards equals 270 cubic feet, so coverage depends on depth: roughly 3,240 sq ft at 1 inch, 1,620 sq ft at 2 inches, or about 810 sq ft at 4 inches. Use these estimates to plan your order and add 10-15% extra for compaction and uneven areas.

You can install fill dirt yourself for small jobs, but proper spreading and compaction are important to avoid future settling; a plate compactor and basic grading tools are usually needed. For large fills, near structures, or where drainage matters, hire a pro or consult an engineer to make sure the work meets local requirements.

Cheaper alternatives include reusing on-site subsoil from excavations, asking local contractors for excess material, or finding nearby borrow pits; these options reduce material and haul costs. Always check material quality and any local permitting or contamination issues before using salvaged soil.

Occasionally local construction sites, landscapers, or homeowner projects have surplus subsoil available for free or low cost, but you must get permission and arrange pickup or delivery. Hello Gravel can help locate nearby suppliers and manage delivery to avoid the legal and logistical risks of scavenging material without consent.

Fill dirt is usually denser, lighter in color, and contains little organic matter or roots compared with dark, crumbly topsoil. In West Texas you may also notice caliche or clay content; if you need lab or visual confirmation, request a sample from your supplier before delivery.

Compact fill dirt in 4- to 6-inch lifts with a plate compactor until the surface feels firm and shows minimal settlement under load. For foundations, retaining walls, or structural fills, follow engineer specifications or local building code requirements rather than a DIY rule of thumb.