Fill Dirt in Hebbronville, TX

Per-ton prices for loose fill dirt in West Texas commonly range from about $10 to $30 per ton, but local availability and haul distance can move that figure. Hello Gravel has a 3-ton minimum; standard delivery is 2+ business days and delivery fees depend on distance, truck type, and site access—check your zip code for an accurate quote.

Hello Gravel connects you with trusted local suppliers, including landscapers, small quarries, and dirt contractors that serve Hebbronville and surrounding Jim Hogg County. Enter your zip code on our site or call our team and we will match you with suppliers, show pricing, and schedule a dump-truck delivery.

Hebbronville’s dry conditions and periodic heavy storms mean fill dirt can shrink and settle when very dry, then erode or wash out during sudden rains. For driveways or structural work in this climate, plan for compaction, proper grading, and drainage to reduce settlement and washouts.

Use this method: calculate cubic yards = (area in sq ft * depth in ft) / 27, then multiply by the material weight in tons per cubic yard (fill dirt is commonly about 1.2–1.4 tons/yd3). For example, to raise 1,000 sq ft by 2 inches: yd3 = 1000*(2/12)/27 = about 6.17 yd3; at 1.3 tons/yd3 you would need roughly 8 tons. Ask Hello Gravel for a site-specific estimate when you order.

Local rules vary: small landscape fills and driveways often do not need a permit, but structural foundation backfill and engineered fills usually must meet building-code requirements and may need inspection or a permit. Contact Hebbronville City Hall or Jim Hogg County building officials for permit rules on structural work, and consult a licensed engineer for foundation backfill specifications.

For structural fills, aim for engineered compaction—typically around 90–95% of standard Proctor as specified by an engineer. Compact in 4–6 inch lifts using a plate compactor or vibratory roller for larger areas; use a jumping jack (rammer) in tight spots. For nonstructural landscape fills, a good pass with a plate compactor and proper grading is usually sufficient.

Fill dirt is usually the least expensive option but is not designed to carry traffic and can rut, settle, or wash away under repeated loads or heavy rains. Crushed limestone or road base is compactable, drains better, and provides a durable wearing surface for driveways, making it a better long-term choice despite higher per-ton costs. For a low-cost grade raise followed by a road-base top, many local contractors use fill dirt as a bulk subfill then cap with road base.

Common add-ons include tailgate spreading (driver discretion), machine grading, and compaction. Hello Gravel offers delivery and can request tailgate spreading at checkout, but for reliable spreading, grading, and compaction hire a local contractor; small jobs often run a few hundred dollars while larger site prep with equipment can be $500–$2,000 depending on scope—get written quotes for accurate pricing.

For simple landscape fills, expect some settling over the first 6–12 months that may require minor top-ups. For driveways or load-bearing uses without stabilization, you may see deterioration within a few years, especially after heavy rains; properly compacted and capped areas last much longer. Regular grading and drainage maintenance reduce the need for replacement.

Yes—avoid scheduling large deliveries or final grading during the rainy season or immediately before forecast storms because sudden runoff can wash fresh fills away. Hot, dry periods increase dust and can make compaction trickier, so aim to order and install when the ground is workable and not saturated, and plan erosion control if storms are possible.