Fill Dirt in Gladewater, TX

Fill dirt is clean, subsoil material used to raise grade or fill holes. In Gladewater it is commonly used to level yards, build up pads for sheds, and bring site grades up before laying a structural base for driveways. It is not intended as a finished topsoil for planting or as a final driveway surface.

Delivered prices for fill dirt in Gladewater typically range from about $12 to $30 per ton or roughly $15 to $40 per cubic yard, depending on moisture content, supplier, and haul distance. Exact pricing varies by supplier and order size; use Hello Gravel to get local quotes and check delivery fees and minimums.

Hello Gravel connects you with local suppliers and contracted dump-truck haulers serving Gladewater and nearby towns within a 30-mile radius. Delivery is usually by tri-axle dump truck with a minimum order of 3 tons; next-day delivery is sometimes available for orders placed before noon CST for an extra fee.

Permit requirements vary by project scope and local code; small top-up jobs usually do not need a permit, while major grade changes, retaining walls, or any work affecting drainage may require city or county approval. Contact the City of Gladewater planning or public works office before starting, and check for HOA or easement rules.

For a garden shed, 4 to 6 inches of compacted fill dirt is commonly used as a base; for driveways plan on 6 to 12 inches of compacted fill dirt plus a structural rock base on top. House footings and pads generally require engineered fill and compaction to 95% or higher (standard Proctor) per local code. Always confirm requirements with an engineer for structural projects.

Hot summers and occasional heavy rains in the West Texas/Gladewater area can cause shrink-swell in clay-rich fill and washouts on poorly drained slopes. To improve durability, use well-graded, low-clay fill when possible, confirm proper site drainage, and cap fill with gravel or pavement where exposure to rain or traffic is expected.

Costs vary, but a rough delivered estimate: a 500 sq ft area at 4 inches needs about 6 to 7 cubic yards and may cost $100 to $300 delivered; a 1,000 sq ft area at 4 inches needs about 12 to 13 cubic yards and may cost $200 to $600 delivered; a 2,000 sq ft area at 4 inches needs about 25 cubic yards and may cost $400 to $1,200 delivered. Tailgate spreading or light grading by the driver may be available for an extra fee ($75 to $600 depending on project size and labor), but spreading is subject to the driver’s discretion.

Use a conversion range because density varies: a loose cubic yard of fill dirt typically weighs between about 1.2 and 1.6 tons. Multiply cubic yards by 1.2–1.6 to estimate tons; for a tighter estimate, ask your Hello Gravel quote for the supplier's specific conversion value.

Fill dirt is good for raising grade but not ideal as a final structural base for driveways because it can hold moisture and settle. Crusher run or roadbase is preferred for the load-bearing layer and surface under driveways because they compact well and provide drainage. A common approach in Gladewater is to use fill dirt to get the grade right, then cover it with 4 to 8 inches of crusher run or roadbase for durability.

Common issues are settling, rutting, erosion after heavy rains, and vegetation struggling on pure fill dirt. Inspect graded areas after major storms and at least once a year; regrade low spots, maintain surface drainage, and add gravel where traffic causes rutting.

Hello Gravel connects you to local suppliers, shows upfront pricing, and schedules dump-truck delivery to your address. Minimum orders start at 3 tons, many areas offer free standard delivery in 2+ business days, and next-day options are available for orders placed before noon CST for an additional fee.