Gravel in Fulton, TX

Typical delivered prices in West Texas (Fulton, TX) for common gravel range from about $30 to $60 per ton depending on the size, type, and distance from the quarry. Local availability and seasonal demand can shift prices, and Hello Gravel has a 3-ton minimum order for most deliveries. Contact our team for an exact delivered price to your zip code and requested delivery window.

Material-only, loose gravel varieties (bank run or pea gravel) are often a bit cheaper per ton than screened crushed stone, but total installed cost depends on base preparation and compaction. Crushed stone tends to compact and lock together better, which can reduce long-term maintenance and make it more cost-effective over time. Ask our team for a delivered quote for both materials so you can compare upfront cost and likely maintenance needs.

The most economical options in the region are typically bank-run or crusher-run base gravels and recycled road base, which are commonly used as driveway bases. Delivered price in Fulton usually falls in the $25 to $45 per ton range for these basic materials, depending on supplier and haul distance. Remember Hello Gravel requires a minimum 3-ton order and delivery fees can vary with exact location and truck access.

Texas black gravel, often marketed as Blackstar, is a dark decorative aggregate usually made from crushed slag or dark basalt used for accents, walkways, and driveways. It is decorative and typically costs more than basic base gravel; expect delivered prices in the Fulton area around $45 to $85 per ton depending on supply and color consistency. Because it is a specialty material with regional availability, contact us for current photos and an exact delivered price to your address.

A typical tri-axle dump truck carries roughly 10 to 15 cubic yards (about 13 to 20 tons, depending on material density). For a common 100 ft long by 12 ft wide driveway at 3 inches depth you need about 11 cubic yards (roughly 14 to 15 tons), which is usually covered by one full tri-axle load. Wider driveways or deeper base layers will require additional loads; tell us your exact length, width, and desired depth and we will estimate loads and pricing.

For a 100 ft by 12 ft driveway at a 3-inch top layer you need about 11 cubic yards, which converts to roughly 14 to 15 tons of gravel. With typical delivered prices in Fulton of $30 to $60 per ton, material plus delivery typically runs about $420 to $900, though actual cost depends on material choice, exact delivery location, and truck access. Contact Hello Gravel with your driveway dimensions and preferred material and we will provide a firm delivered price.

A 20 ft by 20 ft area at a 3-inch depth is about 3.7 cubic yards, or roughly 4.5 to 5.5 tons of gravel depending on material. With typical delivered prices around $30 to $60 per ton in Fulton, expect supply and delivery to run roughly $135 to $330, not including any site preparation or spreading labor. Because Hello Gravel has a 3-ton minimum, many 20x20 jobs will meet the minimum but contact us for an exact quote and delivery availability.

Two inches is generally too thin for a driveway surface; we recommend at least 3 inches for a wearing layer and 4 to 6 inches or more for a compacted base depending on soil and traffic. Increasing depth raises material volume linearly (for example, going from 2 inches to 4 inches doubles the material needed), so your cost will increase proportionally. If you have expansive clay or poor subgrade in West Texas, plan for a thicker base to avoid rutting and higher maintenance.

Crushed stone and loose gravel generally drain well compared with compacted soils; proper drainage depends on depth, gradation, subgrade preparation, and using geotextile fabric where needed. Hello Gravel supplies and delivers materials to Fulton but does not guarantee installation services; drivers may offer discretionary tailgate spreading but installation and drainage design are not part of standard delivery. For drainage-sensitive projects we recommend site prep with a contractor and can coordinate delivery to match their schedule.

Yes, some suppliers in our West Texas network offer stabilized gravel blends and polymer binders that create a firmer, low-dust surface; availability varies by region and supplier. Stabilized products and binders are typically more expensive than loose gravel and can run from about $60 to $150 per ton for materials, with additional costs for mixing and installation by a contractor. Contact Hello Gravel so we can check local availability and connect you with partners who can provide stabilized installation quotes to Fulton.