Fill Dirt in Fulshear, TX

Typical delivered prices in the Fulshear area run about $12 to $25 per ton, roughly $15 to $35 per cubic yard, depending on moisture, compaction, and haul distance. Large orders usually reduce the per-ton price and Hello Gravel has a 3-ton minimum and standard 2+ business day delivery; next-day options are available for orders placed before noon CST for an extra fee. Final price will be shown at checkout based on your zip code and supplier.

Use a compactable, low-organic-content fill dirt (often called structural or engineered fill) for raising grades; it should have minimal topsoil and roots so it compacts well. In Fulshear's clay-prone environment, consider blending with coarse sand or a small amount of crusher fines to improve drainage if you expect standing water, and consult an engineer for foundation or large grade changes.

A 6-inch layer equals 0.5 foot, or about 0.0185 cubic yards per square foot. Using a typical fill dirt weight of 1.1 to 1.4 tons per cubic yard, expect roughly 0.02 to 0.026 tons per square foot; for example, a 1,000 sq ft area will need about 20 to 26 tons of compacted fill dirt. Always order 5-10% extra to account for compaction and settling.

Hello Gravel's standard delivery window is 2+ business days from order confirmation, and next-day delivery is available for orders placed before noon CST with an additional fee. Exact lead times depend on supplier availability, your zip code in the Fulshear area, and truck scheduling, so check the checkout calendar or contact our team to confirm a specific date. Tailgate spreading may be requested at checkout but is performed at the driver's discretion.

Small landscaping fills are often permitted without special approval, but significant grade changes, retaining walls, or fills that affect lot drainage may require city or county permits in Fulshear and Fort Bend County. Check with the City of Fulshear Planning and Public Works or your HOA before placing large volumes, and consider a civil or geotechnical review for fills near foundations or property lines. When in doubt, contact local permitting offices to avoid code or drainage issues.

Fill dirt alone is not recommended as a finished driveway surface because it compacts poorly and holds water in Houston-area rains. For durable driveways in Fulshear, use structural fill for subgrade, capped with engineered road base or crushed limestone and a surface material (pavers, asphalt, or compacted crusher fines). If you must raise the approach, use compacted fill dirt as a sublayer and then install a proper base and drainage.

Compact fill in thin lifts (4 to 6 inches) using a vibratory plate compactor for small areas or a vibratory roller for larger yards and driveways. In Fulshear's hot, dry summers keep fill slightly moist but not saturated during compaction, and compact earlier or later in the day to avoid rapid drying. If you are raising grades more than a few inches or near structures, consider a geotechnical-recommended compaction spec and inspection.

A well-compacted, low-organic fill that has been properly graded and drained can remain stable for many years. In poorly compacted or organic-rich fills, Houston-area heavy rains and clay soils can cause settlement and soft spots within 1 to 3 years, requiring regrading or additional material. Good drainage, erosion control, and correct compaction techniques greatly extend longevity.

DIY can save money on labor for small, simple fills, but you will need equipment rental (excavator, compactor), time, and the ability to safely receive dump trucks at your site. For larger fills, near structures, or where drainage/permit issues exist, hiring a contractor or professional installer reduces risk and often saves time; get at least two quotes and factor in Hello Gravel delivery logistics when comparing costs. Contact our sales team for material-only pricing or to help coordinate pro installers through local suppliers.

Yes. Adding fill on slopes can change runoff patterns, increase erosion, and cause water to pond on neighboring properties if not handled correctly. Use retaining walls, terraces, erosion-control matting, and properly sized drainage (French drains, swales) to manage runoff, and check local grading requirements and neighbor impact rules in Fulshear before placing large volumes of fill dirt.