Gravel in Fayetteville, TX

Costs vary by material, supplier, and delivery distance, but you can estimate material plus delivery using a per-ton range. For a 2-car, 100 ft driveway at a 3u0022 depth you need about 26 tons; if material and delivery run roughly $30 to $60 per ton in the region, expect $780 to $1,560 for delivered material. Hello Gravel shows transparent pricing when you enter your zip code and can confirm any delivery fees and minimums before you buy.

In West Texas around Fayetteville you will commonly see crushed limestone, pea gravel, and decomposed granite available from local suppliers. Crushed limestone and crusher run are popular for driveways because they compact and provide a stable surface, while pea gravel and decomposed granite are used for patios and decorative areas. Keep in mind regional sourcing means color and texture can vary from photos.

A 2-car driveway about 20 ft wide and 100 ft long (2,000 sq ft) requires roughly: 2u0022 depth = 17 tons, 3u0022 depth = 26 tons, 4u0022 depth = 35 tons. Hello Gravel uses local material weights for more precise estimates and our calculator will round for ordering and the 3-ton minimum.

Hello Gravel connects you with vetted local suppliers and haulers that service Fayetteville; specific suppliers vary by zip code and regional availability. Our platform standard minimum order is 3 tons, and delivery fees depend on distance and truck type—many areas qualify for free delivery while others incur a fee. Enter your zip code on our site or contact our team to see exact supplier options, minimums, and delivery costs for your address.

Yes—gravel can work well in Fayetteville if installed properly. Hot, dry summers and clay subgrade mean you should prepare the subgrade, add a compacted base, and ensure drainage to prevent rutting and washout. For erosion control on slopes, pair gravel with proper grading, vegetation, or erosion-control fabric for best results.

Contractors typically remove soft topsoil, grade for drainage, and install geotextile fabric over clay subgrade to reduce mixing. Next they add and compact a 4u0022 to 8u0022 base of crusher run or crushed stone in 2u0022 to 3u0022 lifts, then spread and compact the finish layer of your chosen gravel. Edge restraint and a slight crown help water drain off and reduce tracking onto lawns or roads.

Labor and installation costs vary with scope, but a simple gravel driveway install with grading, base, and compacting commonly ranges from about $3 to $6 per square foot in rural West Texas; higher if excavation, drainage work, or heavy equipment access is needed. For patios or decorative areas the price is often lower per square foot, but get written estimates from local contractors for an accurate number tailored to your site.

Crushed limestone (especially mixes with fines like crusher run) tends to compact and bind, offering better dust suppression and a firmer surface than loose round gravel, but it can still produce dust in dry conditions. Clean, angular gravel drains well but shifts more under traffic and may need more frequent topping up. For Fayetteville's climate, a compacted crushed-stone base with a top layer suited to appearance and use gives the best balance of drainage, dust control, and longevity.

Frequency depends on traffic and local runoff, but many homeowners top up or regrade worn areas every 1 to 3 years and perform more substantial replenishment every 3 to 5 years. Storm events or heavy vehicle use can create ruts or washouts that need sooner attention, so good initial drainage and proper compaction reduce maintenance in West Texas conditions.

Residential driveways in the Fayetteville area typically use a compacted base of 4u0022 to 6u0022 of crusher run with a 2u0022 to 3u0022 finish layer of gravel. Farm lanes and heavy-use access roads often require 6u0022 to 12u0022 of compacted base and wider sections to handle larger loads. Contractors compact in 2u0022 to 3u0022 lifts with a roller or plate compactor and maintain a slight crown to shed water for long-term performance.