Fill Dirt in Evadale, TX

Delivered fill dirt prices in Evadale typically run in a range because of haul distance and site access. Expect roughly $15 to $35 per cubic yard (about $18 to $42 per ton) delivered to most West Texas residential sites, though remote or tight-access jobs can cost more. Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee.

Use this simple formula: cubic yards = (area in square feet * depth in inches) / 324. Then convert cubic yards to tons by multiplying by about 1.2 (one cubic yard of compacted fill dirt in Evadale averages ~1.2 tons), so tons = cubic yards * 1.2. For example, raising 1,000 ft2 by 3 inches needs about 9.26 cubic yards, or roughly 11.1 tons.

For fill dirt in the Evadale/West Texas area, use about 1.2 tons per cubic yard as a practical average for compacted material. Loose or very sandy material can be lighter (around 1.0 to 1.1 t/yd3) and heavy clay-rich fill can be heavier (up to about 1.4 t/yd3), so use 1.2 t/yd3 for estimates and ask Hello Gravel for an exact conversion when ordering.

A balanced clay-sand fill dirt that includes some fines is best for Evadale's sandy-clay conditions because it compacts well and resists erosion. For structural fills or base layers aim for an engineered or compactable fill with well-graded particle sizes and a target compaction of 90%+ of Standard Proctor for contractor jobs; homeowners can target 85%–95% with proper equipment. If you need a specific engineered mix, ask Hello Gravel to match local supplier options or to source material suitable for site-specific compaction tests.

Fill dirt in West Texas holds up if installed with proper grading and drainage because heat alone causes little damage, but heavy rain and freeze-thaw can cause settling or erosion in poorly compacted fills. Use slopes, swales, or drainage pipes to move water away, and consider a rock cap or vegetation to protect exposed areas. Areas with higher clay content can shrink and swell seasonally, so compaction and moisture control are important.

Fill dirt is usually the least expensive option and is intended for building grade and raising elevations, not as a finished driveway surface. Crusher run (crushed stone with fines) is more expensive but provides a stable, drivable surface and better drainage for driveways. Clean fill (uncontaminated screened soil) sits between them in cost and is used where good compaction and fewer fines are needed; choose based on final use—subgrade, base, or surface—and your budget.

Key pricing factors are haul distance from the supplier, truck size and weight limits, site access (turning room and driveway width), loader or placement fees, required permits, and the total order size. Seasonal demand, the need for smaller trucks for tight access, and requested services like tailgate spreading or multiple drop points also raise costs. Hello Gravel provides upfront pricing and will list haul or placement fees on quotes when applicable.

Permit rules vary by project and location within Jefferson County; small residential grading often needs no permit, but larger fills, work in floodplains, wetlands, or near streams typically require county or state permits. Before ordering large quantities, check with the Jefferson County planning office or the Evadale city/town office for local rules, and ask Hello Gravel if you need documentation for contractors or permitting.

Hello Gravel connects you with local suppliers and hauling fleets that deliver fill dirt across Jefferson County and nearby West Texas towns. We recommend using the Hello Gravel calculator to check availability for your zip code and contacting our sales team to request certified or tested fill dirt options and documentation for contractor jobs. For larger or engineered projects you may also ask for supplier lab data or compaction test results.

Place fill in 4