Fill Dirt in Crowley, TX

Fill dirt is generally subsoil with low organic content and a mix of fines and small particles; color and texture vary with local geology in West Texas. It is best used to raise elevations, backfill around foundations, and build up low spots before a finished surface is installed; it is not intended as a wearing surface for driveways or walkways.

Prices vary by supplier, distance, and whether the dirt is screened, but expect typical delivered ranges of about $10 to $30 per ton or $15 to $45 per cubic yard in the Crowley area. Exact pricing depends on your zip code, quantity, and any hauling constraints; Hello Gravel's checkout will show current local quotes and our minimum order is 3 tons.

Local suppliers commonly offer unscreened fill, screened fill (fewer rocks), and 'clean' structural fill with low organic material. For backfill and grading choose screened or structural fill; for a driveway subgrade, use compactable fill under a base material, but finish the driving surface with crusher run or recycled aggregate rather than plain fill dirt.

Crowley and West Texas have hot summers, episodes of heavy rain, and soils with clay tendencies; these factors can cause drying shrinkage, swelling, and erosion if fill is not properly prepared. To perform well, fill dirt should be compacted in lifts, graded for drainage, and paired with stabilization measures where slopes or flash-flood paths exist.

Use these local estimates: filling 4 inches over a single-car driveway (12' x 20') is about 3 cubic yards (roughly 3.5 to 5 tons); a two-car driveway (20' x 20') at 4 inches is roughly 5 cubic yards (about 6 to 8 tons). For larger yard raises, 50' x 50' at 6 inches is about 83 cubic yards (roughly 100 to 125 tons); remember 1 cubic yard of fill dirt in our area typically weighs about 1.2 to 1.5 tons depending on moisture and compaction.

Contractors in the area recommend placing fill in 4- to 6-inch lifts and compacting each lift to high density using a plate compactor for small areas or a vibratory roller for larger areas. Lightly moisten very dry fill before compaction but avoid saturation, and consider geotextile stabilization or structural fill for poor or high-clay subgrades.

Fill dirt is the cheapest option for raising grade but is not durable as a finished driving surface; crusher run or recycled concrete offer better compaction, load-bearing capacity, and drainage for driveways. Decomposed granite is decorative and good for light-traffic paths but will not perform as well as crusher run under heavy vehicle loads.

Yes; certain grading, drainage, and floodplain rules may apply in Crowley and Johnson County, especially if you are altering drainage or working in mapped floodplain areas. Check the City of Crowley building and permitting office and any HOA guidelines before delivery, and contact our team if you need help confirming local requirements.

Hello Gravel connects you with local suppliers that typically deliver by tri-axle dump truck; minimum orders are usually 3 tons and standard lead time is 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. Truck size, access, and distance affect hauling costs and whether the driver can tailgate spread; add delivery notes at checkout to describe access and preferred placement.

Fill dirt used under a finished surface will last indefinitely if properly compacted and drained, but exposed fill can settle, wash out, or grow weeds and will likely need regrading, additional material, and vegetation or erosion control after heavy rains. Plan for periodic checks after storms, add material where settling occurs, and install proper drainage, edging, or landscaping fabric to reduce maintenance.