Fill Dirt in Coppell, TX

Fill dirt is soil used to raise or level ground and usually contains subsoil with little organic matter. In Coppell and West Texas it commonly ranges from sandy loam to clayey subsoil and may include local caliche or small rock; color and texture will vary by supplier.

Delivered prices in the Coppell area typically range from about $10 to $25 per ton, which is roughly $12 to $30 per cubic yard depending on moisture and local density. Prices vary by supplier, screening, delivery distance, and seasonal demand, so get a quote for an exact price.

Common types around Coppell include screened fill (clean subsoil), clayey fill, and local caliche-bearing fill. Screened fill is preferred for grading and residential backfill because it compacts well; clayey or caliche mixes are cheaper but can hold water and affect drainage.

Hello Gravel's minimum order is 3 tons, and typical delivery trucks are tri-axle dump trucks carrying about 10 to 14 tons (roughly 8 to 12 cubic yards). Standard delivery is 2+ business days with next-day options for orders placed before noon CST; delivery fees vary by supplier and location and are free in many areas—confirm pricing at checkout.

You should check with the City of Coppell Planning and Engineering departments before adding significant fill. Permits are commonly required if the fill changes drainage, affects neighboring properties, is in a floodplain, or impacts stormwater systems; contact local officials for specific thresholds and permit steps.

In Coppell’s hot, dry summers fill dirt can shrink and settle if not properly compacted, while heavy rains can cause erosion and washouts on unprotected slopes. Proper compaction, erosion control (silt fence, mulch, vegetation), and planning for drainage will greatly improve performance year-round.

For non-structural residential areas aim for staged compaction in 4-6 inch lifts using a plate compactor or walk-behind roller; for structural areas (near foundations) contractors typically target 90-95% relative compaction per engineer specs. Hire a contractor or follow engineer recommendations for foundation backfill to ensure compliance with local building codes.

Typical uses include raising yard grades, filling low spots, utility trench backfill, and site grading. Best practices are to compact in lifts, keep organic topsoil separate for final landscaping, plan drainage before placing fill, and avoid using fill dirt as a finished driveway surface—use proper base rock instead.

Many suppliers include delivery but charge extra for spreading or compaction; tailgate spreading may be free or a small fee but is done at the driver's discretion. DIY costs include hiring labor plus equipment rental (skid steer or tamping equipment often $200-$400/day), and for small jobs hiring a local contractor for spreading/compaction can be competitive when you factor in time and finishing quality.

No - fill dirt is inexpensive for raising grade but is not suitable as a wearing surface for driveways because it compacts poorly and erodes. Crushed limestone or decomposed granite make better driveway surfaces in Coppell, providing drainage and a stable driving layer; use fill dirt only for subgrade preparation beneath a proper aggregate base.

Properly compacted fill used as subgrade can be stable for decades, but all fills experience some initial settling and may need additional top-up. Expect to monitor for settlement, regrade low spots, protect against erosion during heavy rains, and add topsoil and seed or mulch for landscaping to reduce future maintenance.