Fill Dirt in Comfort, TX

Prices vary with haul distance, moisture content, and material source, but expect roughly $6 to $20 per ton (about $8 to $30 per cubic yard) delivered to the Comfort area. Larger orders, local suppliers, and dry, easy-to-load material push prices toward the low end, while long rural hauls, wet/dense material, or small orders increase costs. Contact Hello Gravel for an exact quote for your zip code and project size.

Hello Gravel connects you with local Kendall County and West Texas suppliers and contract haulers who typically operate within a 20-50 mile radius of Comfort. Expect standard delivery included in many quotes for nearby loads, while long hauls, difficult access, or rural ranch drop-offs may incur extra mileage fees or minimums. If you need a specific supplier name, Hello Gravel will match you to vetted local sources during checkout.

Comfort sits in the Texas Hill Country with limestone bedrock, shallow topsoils, caliche layers, and pockets of clay and loam—these features influence drainage, settlement, and compaction. Shallow, rocky or caliche-prone areas may need rock removal or engineered import fill for structural areas, while clay pockets can hold water and cause settlement unless properly compacted and graded. Always have problem areas assessed before placing large quantities of fill dirt.

For structural uses, request low-organic, well-graded fill with rock and fines removed as needed and compaction to at least 90-95% of the standard Proctor dry density, as verified by a compaction test when required. For driveways, plan on a compacted subgrade of fill dirt with an engineered base rock layer (4-8 inches) on top; for building pads, bring in engineered fill or compacted fill under slab-on-grade to local code. Ask Hello Gravel or your engineer for project-specific specs and testing requirements.

Yes. Hot, dry periods can cause loose fill dirt to shrink and blow or form cracks, while intense storms can erode or wash away unprotected fill on slopes. Use proper grading, erosion control (silt fence, mulch, temporary seeding), and compaction to reduce settling and erosion; after extreme weather, inspect fills and regrade or top up as needed. For long-term surfaces, cap fill dirt with topsoil, turf, or structural aggregate to reduce maintenance.

A typical tri-axle dump truck carries about 10-12 cubic yards (roughly 12-15 tons depending on moisture and material). Example: a single-car driveway 100 ft x 10 ft at 4 inches of compacted fill needs about 24-25 cubic yards (2-3 truckloads). Hello Gravel's minimum order is 3 tons, so small jobs may still require the minimum or consolidation with neighbors.

Yes. Grading, driveway construction, septic/drainfield work, and major earthmoving often fall under Kendall County, private property, or HOA rules. Always check Kendall County permitting, the local health department for septic/drainfield restrictions, and any HOA guidelines before importing or placing large volumes of fill. If in doubt, Hello Gravel recommends contacting the county permitting office or a licensed local contractor for guidance.

Fill dirt is an economical bulk soil used to raise grade and fill voids, but it is not intended as a final driving surface or structural base. Crushed limestone or base rock provides a stable, drainage-friendly surface for West Texas driveways and should be used on top of compacted fill for durability. Engineered fill is tested and compacted to specific standards for buildings and costs more but reduces settlement risk for foundations and slabs.

Common add-ons include placement instructions (exact dump location), tailgate spreading at the driver's discretion, on-site compaction or grading by a local contractor, and additional hauling fees for remote or gated ranch properties. Customers often request rocks or debris removal, finer screened fill, or a mix suitable for regrading lawns—add those requests in Order Notes so Hello Gravel can match the right supplier.

Standard delivery is 2+ business days, with next-day delivery available if ordered before noon CST for an extra fee; however, seasonality and large orders can push lead times to 1-2 weeks. Spring and fall are busier for landscaping and construction, and heavy rains can limit quarry and trucking access, increasing wait times and sometimes costs. For large or time-sensitive jobs, book early and confirm staging and access details with Hello Gravel.

You should not assume fill dirt is suitable for septic systems without approval because septic design depends on native soils, percolation rates, and health department rules. Kendall County and state regulations govern septic placement—engineers or licensed installers often specify approved fill types, gradation, and compaction. Consult a licensed septic designer and the county before importing fill for drainfields.

Clear organic topsoil, vegetation, large debris, and unstable materials from the placement area and mark the preferred dump location and any access constraints for the driver. Provide a wide, stable approach for the dump truck and note gates, low branches, or buried utilities; if compaction or grading is required, coordinate a contractor in advance. Add these details in Order Notes at checkout so Hello Gravel can match the right truck and supplier.