Fill Dirt in Cloverleaf, TX

Delivered fill-dirt prices in the Cloverleaf/Texas region typically range from about $6 to $20 per ton depending on distance from the supplier, the haul size, and local availability. Hello Gravel shows exact pricing for your zip code at checkout, and larger orders usually reduce the per-ton price. Remember prices fluctuate with demand and regional sourcing, so get an on-site quote for a firm price.

Hello Gravel connects you with local suppliers and haulers that serve the Cloverleaf area, so you can order by the truckload or by ton online. Bulk discounts and lower per-ton rates usually kick in for 10+ ton orders; contact our sales team (855-241-8884) for contractor pricing or repeated deliveries to the same site. We recommend entering your zip code on the site to see nearby suppliers and current bulk options.

A good rule: 1 cubic yard of fill-dirt weighs roughly 1.2 to 1.5 tons, depending on moisture and composition. Examples: to raise 100 sq ft by 6 inches you need about 1.85 cubic yards (≈2.2–2.8 tons); a 1,000 sq ft area raised 6 inches needs about 18.5 cubic yards (≈22–28 tons). Use Hello Gravel's calculator for precise estimates by entering square footage and desired depth.

Fill-dirt can be used in Cloverleaf to raise grade and fill low spots, but standard fill-dirt often contains fine particles and clay that do not drain well. In hot, humid areas with native clay, use fill-dirt for bulk elevation but add a drainage layer (clean sand or crushed stone) or cap with structural base where you need good drainage and load-bearing capacity. Always compact in lifts and consider engineered fill for areas under structures or where water must move away from the site.

Spread fill-dirt in 4- to 6-inch lifts and compact each lift with a plate compactor or roller until achieving uniform consolidation; keep moisture content moderate to aid compaction. For small lawn repairs or garden beds DIY is practical, but for building pads, driveway subgrades, or large elevations hire a contractor who can manage lift thickness, compaction testing, and drainage. Contractors are recommended for anything affecting foundations, utilities, or driveways to avoid settlement or drainage problems.

Fill-dirt is intended to add volume and raise grade but it is not a durable finished surface; it compacts but holds moisture and can rut under traffic. Crushed limestone and road base are processed, angular materials designed for load-bearing and drainage, so they outperform fill-dirt for driveways and high-traffic areas. A common approach in Cloverleaf is to use fill-dirt to raise grades and then place a road-base or crushed stone structural layer on top for drivability and longevity.

Hello Gravel's minimum order is 3 tons, which is standard for many of our haulers in the Texas region. Hauling fees vary with distance, site access, and driveway conditions; remote or difficult-to-access sites may incur extra charges. For commercial customers and large-volume jobs, contact our sales team for negotiated rates and scheduled deliveries—larger orders usually receive better per-ton pricing.

Permit and HOA rules can vary across Cloverleaf and the surrounding Texas Region, so check with Harris County or the local municipality and your HOA before doing major grading or raising lot elevations. Important issues include drainage, setback and easement restrictions, and stormwater management; some projects that alter runoff may require a permit or an engineered plan. If in doubt, consult your county building department and your HOA guidelines before ordering large volumes.

With proper compaction and drainage, fill-dirt used to change grade can be stable for years, but without proper preparation it will settle, rut, and erode during heavy Texas rains. Expect some post-installation settling that may require additional top-up material, regrading, and occasional reseeding or erosion control. To prolong life, ensure good drainage away from structures and cap fill-dirt with topsoil and vegetation or a structural layer like road base where traffic is expected.

For small DIY jobs you typically need a shovel, wheelbarrow, landscape rake, hand tamper or small plate compactor, and a water source to get the right moisture for compaction. Larger jobs benefit from skid steers, mini-excavators, dump trucks, and a vibratory plate or roller; professional crews also provide compaction testing and staging. If you need heavier equipment or compaction certification—for example, under a building pad—hire a contractor experienced with local soils in the Cloverleaf area.

Note the exact drop location, preferred delivery date, gate codes, driveway weight limits, and any tight turns or low-hanging wires that could affect a dump truck. If you want the driver to attempt tailgate spreading, request it at checkout but know it is at the driver's discretion and not guaranteed. Also include contact details so the hauler can reach you on delivery day for site-specific instructions.