Gravel in Cleveland, TX

Typical delivered gravel prices in the Cleveland, TX area generally range from about $30 to $60 per ton depending on the material (crushed limestone is usually on the lower end; decorative river rock and specialty blends are higher). Hello Gravel works with local suppliers and haulers and has a 3-ton minimum order; delivery fees or free-delivery promotions vary by supplier and distance. For an exact delivered price for your address, check your zip code on our site or contact our team for a custom quote.

In West Texas and around Cleveland, crushed limestone is the most common choice for driveways because it compacts well and is widely available. Crushed granite and river rock are also popular—crushed granite for a more decorative, durable surface and river rock for accents, drainage features, and dry creek beds. Pea gravel and decomposed granite are used for patios and pathways but have different stability and drainage characteristics to consider.

Use this quick guide as an estimate: a 1-car driveway (roughly 10 x 20 ft) at a 3u0022 compacted depth needs about 2.5 to 3.5 tons, while a standard 2-car driveway (roughly 20 x 20 ft) at 3u0022 needs about 5 to 7 tons. Increasing depth to 4u0022 adds roughly 30% more material. These are estimates; measure your exact dimensions and use our material calculator or contact us for a precise quantity.

Hello Gravel typically requires a 3-ton minimum order, which covers most small driveway and landscaping jobs. Same-day delivery is occasionally available if local suppliers and haulers have capacity, but it depends on timing and availability—next-day delivery is available for orders placed before noon CST for an additional fee. If you need less than 3 tons, check with local suppliers for pickup or smaller contractor yard options; our team can help locate nearby suppliers.

Hot, dry summers can loosen top material and cause dust while heavy summer storms can cause washouts, rutting, and migration of finer material. Proper thickness, good base preparation, and adequate drainage help reduce these problems—keeping a pitched grade and functioning swales prevents standing water. Regular maintenance after storms, including grading and topping up, will extend performance in Cleveland's climate.

A stable base starts with removing organic material and soft spots, then installing a geotextile fabric to slow mixing of subgrade and gravel. Build a compacted base of 4 to 6 inches of larger crushed stone, compact thoroughly, then add a 2 to 3-inch wearing layer of smaller crushed stone or limestone screenings and compact again. For heavy loads or poor soils, increase base depth and consider professional grading and compaction.

Gravel has the lowest upfront material cost and is quick to install, but it requires ongoing maintenance like grading and periodic topping. Asphalt has a higher initial cost but gives a smoother surface and lower short-term maintenance; concrete is the most expensive upfront but is long-lasting with less frequent repairs. Overall life-cycle cost depends on traffic, drainage, and how much maintenance you perform—get local quotes to compare for your site conditions.

Installed contractor prices vary widely by scope and equipment, but many Cleveland-area installers charge roughly $25 to $70 per ton installed (material plus labor and basic grading/compaction) or about $1.50 to $4.00 per square foot for a simple driveway. Larger projects, difficult access, poor soils, or additional grading and drainage work will raise the price. Ask for itemized bids that list material, haul, grading, compaction, and any permit work so you can compare accurately.

Permit and HOA rules can vary: Cleveland city code or Liberty County may require permits for new driveways that cross public right-of-way or change curb cuts, and many HOAs have rules about surface materials and appearance. Before installing, check with the City of Cleveland Public Works or Planning Department and review any HOA covenants to confirm setback, material, or apron requirements. If in doubt, our team can point you toward local contacts to verify rules for your address.

For drainage trenches and French drains, use clean, washed 3/4u0022 to 1-1/2u0022 crushed stone or river rock that allows water to flow while resisting clogging. For erosion control on slopes or channels, larger riprap or 2u0022+ angular stone works best to slow flow and hold soil. For horse paddocks, use a well-draining compacted base (crushed stone) topped with footing like sand or a softer blended product; avoid small rolling stones (pea gravel) alone because they can be unstable under hooves.

Plan to grade and re-distribute material after major rains, recompact rut-prone areas, and top up the wearing layer every 1 to 3 years depending on traffic and weather. Install edging or containment to keep gravel in place and control weeds with a landscape fabric or herbicide where needed. For long-term stability, address drainage issues that cause standing water or concentrated flow paths which accelerate washouts.

Start by entering your zip code on our site to see available materials and local supplier pricing; minimum orders are typically 3 tons. Choose your material, pick a delivery date on the checkout calendar (standard delivery is 2+ business days, next-day available before noon CST for a fee), and pay securely online with major cards, PayPal, or Apple Pay. If you need help choosing material, calculating quantities, or requesting tailgate spreading (drivers may do this at their discretion), contact our team at 855-241-8884 or text 844-407-3734.