Fill Dirt in Bunker Hill Village, TX

Hello Gravel connects you with local Texas suppliers and contracted haulers that service Bunker Hill Village; we do not use company-branded trucks but work with trusted local fleets. Delivery fees vary by supplier, distance from the quarry or pit, site access, and truck size — many customers in the Houston area receive free or low-fee delivery for short hauls, while longer or restricted-access drops can add $50 to $250. Request a quote on our site to see supplier options and an exact delivery fee for your address.

Delivered fill-dirt prices in the Texas region commonly fall in the range of about $10 to $30 per cubic yard, or roughly $12 to $40 per ton depending on moisture and density. Soil weight varies with moisture and clay content, so 1 cubic yard of fill dirt in this area often equals about 1.2 to 1.4 tons; get a site-specific quote from Hello Gravel to lock in exact pricing and minimum-order rules (our minimum is 3 tons).

Bunker Hill Village sits on Houston-area clays that are often expansive and retain moisture, which can make compaction less predictable and increase the risk of settlement or heaving. For foundations and load-bearing areas contractors typically remove or replace native clay with engineered or structural fill and compact it in lifts; for driveways, a compacted granular base (crushed stone) over a properly prepared subgrade performs far better than raw fill dirt alone. If your project is structural, have a geotech or local contractor advise on compaction specs or consider Hello Gravel’s option to request select or engineered fill from suppliers.

Yes — Bunker Hill Village and many local HOAs regulate changes to grade, drainage, and exterior appearance, so adding fill can trigger permit or approval requirements. Before ordering fill-dirt, check with the City of Bunker Hill Village Building Department and your HOA covenants for rules about raising property grade, retaining walls, and stormwater runoff; permits may be required for work that affects drainage or foundations. If in doubt, contact Hello Gravel and we can help you plan quantities while you confirm permits and approvals.

Local contractors typically prefer screened, low-organic fill with minimal roots and debris for structural use; this material compacts more uniformly than mixed or unprocessed dirt. For load-bearing applications they often specify low plasticity (less shrink-swell), maximum particle size under a few inches, low organic content, and compaction to a specified percent of standard proctor (commonly 90–95%). For drainage or trench backfill you may want a freer-draining granular material instead of typical fill dirt; ask suppliers for material descriptions and compaction guidance when ordering through Hello Gravel.

No, fill-dirt is generally not ideal as a finished surface for driveways because it compacts and erodes and does not provide a durable wearing surface. For driveways, contractors usually place several inches of compacted crusher-run or crushed stone over a well-compacted subgrade; for front yards use screened topsoil over the fill where you plan to landscape. If you need a finished surface, order fill-dirt only for grade work and pair it with the appropriate surfacing material from Hello Gravel.

Clear the drop area of vehicles and obstacles, mark driveways and desired pile location, and call 811 to mark underground utilities before trucks arrive. Tri-axle dump trucks need adequate room to back up and may not be able to place material under low wires or through narrow gates; request tailgate spreading at checkout if you want the driver to attempt spreading, but note it is at their discretion. Confirm access restrictions and exact delivery instructions in your Hello Gravel order notes to help avoid extra fees or re-drops.