Gravel in Braeburn, TX

A truckload on a tri-axle dump (typically 10-12 tons) varies by material, distance, and supplier; prices commonly depend on per-ton cost plus any delivery fee. For a rough estimate in the Texas region, multiply the per-ton delivered price (see next item) by the truck’s tonnage and request a quote from Hello Gravel to get an exact delivered price for Braeburn.

Delivered gravel prices in the Texas region typically range roughly $30 to $70 per ton depending on type (river rock, crushed limestone, screenings, etc.) and job distance. Because gravel density varies, one cubic yard usually equals about 1.2 to 1.6 tons, so expect per-cubic-yard delivered prices roughly in the $40 to $110 range; contact Hello Gravel for a firm, location-specific quote.

For a 20-foot long, one-car driveway (10 ft wide) the volumes are: 3-inch depth = about 1.85 cubic yards; 4-inch = 2.47 cubic yards; 6-inch = 3.70 cubic yards. Using typical Texas delivered prices, a 3-inch top layer might cost roughly $75 to $400 and a 4- to 6-inch base will cost more; because our minimum order is 3 tons, small projects often still require ordering at least 3 tons or asking for a nearby supplier’s minimum.

Gravel is naturally rounded stone from river or glacial deposits, while crushed stone is mechanically crushed rock with sharp edges and often contains fines for compaction. For driveways in Braeburn’s climate and soils, crushed stone or crushed limestone with a compactable base layer generally performs better because the angular particles lock together and resist rutting.

A standard full-size pickup bed can usually carry about 1/2 to 1 cubic yard of gravel safely, which translates to roughly 0.6 to 1.5 tons depending on the material and moisture, so one ton may be at the upper end of what is safe. Because Hello Gravel’s minimum order is 3 tons and weight limits vary by truck, most homeowners find delivery by dump truck simpler and safer than hauling multiple pickup loads.

Cheaper options in the region often include crushed concrete, recycled crushed rock, and larger, washed base gravels; asphalt millings can also be cost-effective for resurfacing. Tradeoffs include less attractive appearance, potential dust, and different drainage or compaction behavior compared with quarried crushed limestone or decorative gravels, so balance price against desired look and long-term maintenance.

Yes — polymer-stabilized gravels, resin-bound surfaces, and compacted asphalt millings can behave more like a solid surface and are used locally for driveways and paths. Many regional suppliers and haulers in the Texas area carry asphalt millings and can deliver them to Braeburn; stabilized products are available too but vary by supplier, so check with Hello Gravel for local options and installation partners.

A well-installed gravel driveway in Texas can last many years, but individual lifespans vary widely — expect periodic replenishing every few years and more frequent maintenance after heavy rains. Regular maintenance like regrading, adding fresh top layer, compacting, keeping edges defined, and fixing drainage will greatly extend service life in Braeburn’s climate.

You should not put gravel directly over grass; proper prep—removing sod, addressing grade and drainage, installing edging, and using geotextile fabric or crush-and-run base—will prevent settling and weed regrowth. Hello Gravel connects customers with local suppliers and haulers; some suppliers or contractors offer prep and installation but availability varies, so request those services at checkout or contact our team to be connected in Braeburn.

Asphalt millings are often cheaper than virgin crushed stone for resurfacing because they are recycled material and compact well when graded and rolled, making them a budget-friendly option in the Texas region. Many local suppliers and haulers deliver millings to Braeburn; installation (grading, compaction, and rolling) may be offered by some contractors or hauling partners but should be requested in advance since services vary.