Fill Dirt in Aransas Pass, TX

In Aransas Pass, delivered fill dirt typically ranges from about $10 to $30 per cubic yard (roughly $12 to $35 per ton) depending on supplier, hauling distance, and moisture. Hello Gravel lists minimum orders (3 tons) and may offer free delivery in many areas; final price will depend on availability, truck size, and any requested services like tailgate spreading.

Use clean, compactable 'select' fill dirt that is free of organic material and large debris to avoid future settling. In coastal Aransas Pass, request locally sourced fill that matches local soil (sandy-silt mixes are common) and top it with a granular layer if you need improved drainage or plan to put a driveway on top.

For 100 sq ft: 1 inch = 0.31 cubic yards (~0.4 tons), 3 inches = 0.93 cubic yards (~1.2 tons), 6 inches = 1.85 cubic yards (~2.4 tons), 12 inches = 3.70 cubic yards (~4.8 tons). These estimates use a typical loose fill dirt weight of about 1.3 tons per cubic yard; order a small overage (5-10%) to allow for compaction and grading.

Hello Gravel’s marketplace requires a minimum order of 3 tons; many local suppliers and tri-axle trucks will deliver larger loads (a tri-axle commonly carries roughly 8–12 cubic yards, depending on local truck specs). If you need less than a truckload, ask about shared loads or split deliveries when you request a quote.

Fill dirt alone is not a reliable drainage solution in coastal Aransas Pass because it tends to be less permeable than sand and can lead to pooling if grading is not corrected. For better drainage and flood mitigation, combine graded fill with swales, French drains, or a granular layer (sand or crushed rock) and check local floodplain rules before raising elevations.

Fill dirt is good for raising grade and backfilling but is not an ideal wearing surface; crushed limestone or crusher-run makes a stronger, longer-lasting driveway base and drains better. Sand drains well but shifts under heavy loads; the common approach in Aransas Pass is compacted select fill for subgrade, topped with crushed stone for the driveway surface.

Yes, contractors can compact fill dirt to support heavy equipment if it is placed in controlled lifts (typically 6–8 inches) and compacted with the proper equipment and moisture control. For heavy structures or high loads near Aransas Pass, engineers may require engineered fill, compaction testing, or a structural base such as crushed stone and geotextile fabric.

Requirements vary: Aransas Pass city codes and local HOAs often regulate changes to grading, drainage, and elevation. Before buying or placing fill dirt, check with the Aransas Pass Building Department and your HOA covenants to confirm permit needs, setback rules, and any floodplain elevation requirements.

If properly compacted and covered with a suitable surface (crushed stone or pavers), maintenance is minimal, but coastal storms and heavy rains can cause settling or washouts over time. Expect occasional regrading or top-up of material after major storms and maintain drainage features to minimize erosion.

Dry months outside of hurricane season are generally easiest for deliveries in Aransas Pass because trucks can access sites more reliably and less moisture means lower weight and fewer delays. Prices can vary with local demand and storm season disruptions, so planning deliveries in advance and avoiding peak storm windows usually helps.

Measure the area and depth you need, use the calculator on the site, and order a small overage (5–10%) to allow for compaction. Add delivery notes for preferred drop location, request tailgate spreading at checkout if you want the driver to consider it, and contact Hello Gravel’s team for local guidance or questions about permits and materials.