Fill Dirt in Alton, TX

Costs vary by supplier, distance, and truck size, but a typical tri-axle dump truck load (about 10-12 cubic yards loose) of fill dirt delivered in the Alton area usually runs in the range of $150 to $400. Final price depends on local availability, whether spreading is requested, and any access issues; request an online quote for an exact delivered price to your address.

In West Texas markets serving Alton, fill dirt commonly sells for roughly $8 to $25 per cubic yard delivered and about $15 to $35 per ton delivered, depending on material quality, moisture content, and haul distance. These ranges are estimates; use our online calculator or get a quote for an accurate local price.

Yes, fill dirt is commonly used to raise low spots and adjust grades, but it is not always the best standalone base for driveways. For driveways you may need a compactable engineered fill or aggregate base (e.g., crushed rock) and proper compaction; for lawns you will usually top with several inches of topsoil before seeding or sodding.

Fill dirt generally contains little organic matter and is not ideal for directly growing grass. For reliable turf establishment, add 3 to 4 inches of topsoil or mix compost and topsoil with the fill, then seed or sod; this is especially important in West Texas where native soils can be clayey or caliche-rich.

Some suppliers and independent contractors in the Alton area offer tailgate spreading and loose spreading at the driver's discretion, but spreading and compaction are not guaranteed and may incur extra fees. For reliable spreading and compaction hire a local landscaper or grading contractor; costs vary by scope but expect spreading to start around $50-$150 and compaction or machine work to be priced by the hour or project.

Clear a truck-access path at least 10 feet wide and remove low-hanging branches or obstacles, mark the preferred drop location, and ensure hard surface access for dump trucks. Check with Alton city offices or your county permitting authority for any grading or large fill permits and erosion-control rules; plan for compaction after delivery to avoid future settling.

To raise 100 ft by 12 ft by 2 inches you need about 7.4 cubic yards of fill dirt (1200 sq ft x 2 in = 200 cubic feet; 200 / 27 = 7.4 yd3). At a typical fill dirt density (~1.3 tons per cubic yard) that equals roughly 9.5 to 10 tons; order a little extra (5-10%) to account for settling and compaction.

For West Texas conditions choose clean, inorganic fill with low organic content that compacts well; granular, well-graded subsoil or engineer-specified fill is best for structural fills and drainage. Avoid high-organic topsoil as fill, and consider a layer of crushed stone or base material under driveways to improve drainage and load-bearing performance.

Large fills or grading projects can trigger local permit requirements, stormwater management, or erosion-control rules, so contact the Alton city office or your county permitting department before starting major work. For projects near streams, floodplains, or public rights-of-way you may need additional approvals or professionally prepared plans.

Yes, Hello Gravel provides online quotes and can often schedule standard delivery in 2+ business days; next-day delivery may be available for orders placed before noon CST for an additional fee. Availability for same-week delivery depends on local supplier stock and truck schedules—use our online checkout to check dates and request faster delivery if needed.