Gravel in Raleigh, TN

Prices vary by gravel type and local supply, but a typical tri-axle dump delivery in the Raleigh, TN area runs between $300 and $1,000 depending on volume and material. Hello Gravel requires a 3-ton minimum order and shows exact delivered pricing in checkout so you can get a firm quote for your address.

A 10-yard load usually weighs about 14 to 16 tons and in Raleigh you can expect to pay roughly $400 to $900 depending on material and delivery. Exact pricing depends on the gravel type, seasonal demand, and whether you need next-day delivery or spreading.

One cubic yard of typical crushed gravel weighs about 1.3 to 1.5 tons (roughly 2,600 to 3,000 pounds), depending on rock type and moisture. Cost per cubic yard in the Raleigh, TN area commonly ranges from about $30 to $70 delivered, with specialty or colored gravels costing more.

In Raleigh, 1 ton of common gravel typically costs around $25 to $50 delivered, depending on the material and supplier. Prices are influenced by type (pea gravel, crushed stone, limestone), distance, and any delivery fees or minimums.

The number of tons depends on driveway width and depth. For a 20 ft long driveway: if it is a single-car 12 ft wide and you want a 3-inch finish layer you would need about 3 to 5 tons; for a deeper base (4-6 inches) plan on 6 to 10 tons. Local soil and drainage in Raleigh may require a thicker base, so measure your exact dimensions and add 10% for compaction and waste.

Coverage depends on depth. In Raleigh, 20 tons of typical gravel will cover roughly 2,200 sq ft at 4-inch depth, about 3,000 sq ft at 3-inch depth, or about 4,500 sq ft at 2-inch depth. For driveways you should usually plan on 3 to 4 inches as a finish layer plus a thicker base where needed.

Economical and commonly used materials in Raleigh are crusher run (also called road base) or crushed limestone, because they compact well and are widely available. Pricing varies with local supply, so ordering bulk delivery through Hello Gravel often lowers per-ton cost compared with bagged material.

A 10x10 area is 100 sq ft. For a 2-inch layer you need about 0.6 cubic yards; for 3 inches about 0.9 cubic yards; and for 4 inches about 1.2 cubic yards. Always round up and add about 10% to account for compaction and uneven ground when ordering in Raleigh.

A full cubic yard will often fit physically in a full-size pickup bed, but the weight (roughly 2,600 to 3,000 pounds) can exceed many trucks' payload ratings. Check your truck's payload rating before hauling; for safety and legal reasons many homeowners prefer to order delivery instead of loading a full yard into a pickup.

One cubic yard is about 27 cubic feet, and a typical wheelbarrow holds roughly 3 cubic feet. Expect approximately 8 to 9 wheelbarrow loads to move one cubic yard of gravel.

For Raleigh driveways, a layered approach works best: a compactable base like crusher run or 3/4-inch crushed stone, topped with 3/8- to 1/2-inch crushed stone or pea gravel for finish. Regional suppliers in Tennessee often provide crushed limestone varieties that compact well and stand up to local freeze-thaw and drainage conditions.

You can put gravel over grass in a pinch, but it is not recommended because the grass will die and the material will mix with soil and create maintenance issues. Best practice in Raleigh is to remove sod, compact the base, and install a geotextile fabric if needed to improve separation and drainage before spreading gravel.

Buying in bulk by the ton and having it delivered by dump truck is usually the cheapest way to get gravel in Raleigh, especially for larger projects. Use Hello Gravel to compare local supplier prices and schedule delivery; our platform helps you avoid the higher per-bag cost at retail stores.

Typical tri-axle dump trucks used locally carry about 10 to 12 cubic yards, which translates to roughly 14 to 18 tons for most types of gravel. Larger side-dump or end-dump trucks can carry more, so Hello Gravel will confirm truck type and expected tonnage when you request a delivery quote.